Display of a chamfer in the form of 1x45° rather than 1 and 45° separated

Out of category
1

Hello

I can't find the way to automatically display my 1 x 45° chamfer, which can be modified from the drawing (not in created side).

In the 3D model, I create the chamfer, and by double clicking, I can see that there is the length of 1 and the angle at 45. But isn't Solidworks able to convert these two sides into one in the standard 1 x 45° form?

2

Hello

To my knowledge no, it manages the two parameters independently to be able to play on one or the other.

2 Likes
3

To score in a MEP:

by activating the "quotation" and using the "famous right click"

http://help.solidworks.com/2016/french/solidworks/sldworks/c_chamfer_dimensions.htm

If it's to be able to manage it in 3D, then you should not go through the "chamfer function" but rather do it in a sketch, and side the sketch in the same way:

http://help.solidworks.com/2016/french/solidworks/sldworks/c_chamfer_dimensions.htm

2 Likes