Displaying the dimensions of a sketch during the drilling wizard

2D plans Layout
1

Good evening

When I use the drilling wizard, the dimensions of the sketch disappear. (see attached)

How to view these dimensions  when using the Drill Wizard

Thank you


alesage_tp5.jpg
1 Like
2

Hello

By pressing C (default), you can display the construction tree, and from it you can display a sketch by right-clicking > show (under resreve that the sketches are displayed in the view menu).

3 Likes
3

Hello

we can only display the sketches. As PL says right-click on the sketch and then show But I don't understand why you don't put the holes then you have all side?

2 Likes
4

You should avoid making a separate sketch and then using the drilling assistant.

Preferably, you select the face, you do the Drilling Wizard where you adjust the dimensions (M10 tapping, blind, ...) then in the Position tab, you do your rating of the hole positions, as you did in your image.

5 Likes
5

Thank you

 

One more questions before the weekend

To move a drill?

thank you and have a good weekend

 

 

1 Like
6

Hello

@alain's method. ERP is the most suitable indeed and to answer your 2nd question, well to move a hole you will only have to edit the drilling wizard function and then in the position tab to modify the dimensions.

 

7

Well, let's edit the sketch of the drilling assistant...

2 Likes