Hello
I'm looking for the standard circlips (inner circlips for bore, outer circlips for shaft) under SolidWorks 2012 with configurations.
I downloaded these: http://www.lynkoa.com/store/fr/bibliotheque-de-circlips.html but there are reconstruction errors on the small Øn (Ear and holes)
Thank you in advance.
1 Like
bart
April 18, 2014, 1:52pm
2
Hello
Check it out:
https://grabcad.com/
or on:
http://www.traceparts.com/fr/
No???
Edit: (Stupid answer... ^)
On Grabcad or Tracepart , I wouldn't have a single CIRCLIPS file (Interior or Exterior) with all the dimensions in the same file (configurations)
pl
April 18, 2014, 2:12pm
4
Hello
Can't you have that on the ToolBox?
Otherwise, your file is not repairable?
By inserting a part family for example, to manage it from an Excel table, it might be easier to debug?
I don't have the toolbox.
If the file is repairable (it is already managed via a family of parts), but I am trying to save time.
1 Like
pl
April 18, 2014, 2:22pm
7
Is this link the same as Lynkoa's?
http://www.mycadservices.com/store/fr/bibliotheques-3d-axemble/bibliotheque-de-circlips.html
If the file is buggy, it would be interesting if it was updated!
pl
April 18, 2014, 2:35pm
8
See also this link:
http://wwwip.3dcontentcentral.com/Search.aspx?arg=circlips&contentsourcefilter=Supplier|UserSupplied%20(SupplierAgent)|User&suppliernavigator=NF%20(AFNOR)
Models from the NF AFNOR standard.
gt22
April 18, 2014, 2:40pm
9
Hi @ flegendre
I think the best is to create each type of inter, exter circlips
and then work with the config under exell and property creation
See these links
http://www.lynkoa.com/forum/3d/bibliotheque-solidworks
http://www.lynkoa.com/tutos/3d/creation-des-propriete-de-toolbox-avec-excel
http://forum.solidagora.com/bibliotheques-3dcontentcentral-traceparts-cad-t85.html
MyCAD Service Tool
http://www.mycadservices.com/store/fr/bibliotheque-de-circlips.html
The Emile Morin catalogue
http://www.emile-maurin.fr/fixation-boulonnerie-visserie/fixation-boulonnerie-visserie/grp_cg_b/
@+ ;-)
Well, I did the bottom of the drawers...
I found you quality files: TECHNOROP !! I put you what I had, I can't read them right now. Normally they are in 2012.
And I brought you a great vintage: 2004, 10 years old!! It just goes to show that if I had followed the theories of 5S, I wouldn't have been able to help you!!
Hoping it suits you.
Have a nice weekend.
PS: if others are looking for old files, let me know, you never know...
EDIT: Error corrected, thanks @stefbeno. I had made a Copy/Miss!
circlips_2.zip
5 Likes
gt22
April 19, 2014, 7:20am
11
Hi @ flegendre
After a lot of research, this is what I found for you
Inner Circlips file under catia
test and tell me everything
@+ ;-)
circlips_int.zip
gt22
April 19, 2014, 7:23am
12
Hi @ flegendre
After a lot of research, this is what I found for you
Exterior Circlips file under catia
test and tell me everything
@+ ;-)
circlips_ext_catia.zip
@benoit, I confirm that it works with SW2012.
On the other hand, in your zip, there are 2 directories: 2004 and 2012, the 2012 is empty.
@GT22: SW manages to open the CATPart file but not the associated table
1 Like