Hide dividing lines for drawing

Out of category
1

Hello

I would like to know if there is a possibility to hide the dividing lines in the drawing. I create separation lines for the simulation, in order to define a support surface, but for the fab plane I don't want to see it.

Do you just have to make a special simul configuration with a dividing line and a configuration for drawing? Are there other ways?

1 Like
2

Hello @ clement

For my part I will make a specific configuration for the simulation

@+ ;-)

4 Likes
3

There is the "famous right click" on the view concerned:

Tangent Edge / Remove

 

Otherwise there is the "famous right click" and choose

the small icon "Hide/Show edges"

Then select what you want to remove...

 

"May the dark side be with you... "

3 Likes
4

While waiting for the answer, I made simulation configurations.

I didn't know [the little "Hide/Show edges" icon], it does the job, in case you only have 4 edges to hide. If there were 150 of them, it would be a different story (knowing that I don't want to hide all the tangent edges). Thank you olivier42 for enriching my meagre knowledge of the available features a little more

1 Like
5

if several (numerous) edges there is the "hide tangent edge" on the view