Design challenge: congratulations to the participants!

Community news
1

Hi all!

The design challenge on the theme of the new myCAD mascot has inspired many of you! A big congratulations to all the participants for their involvement and their work, indeed the subject is not simple...

However, I see that the team spirit and the friendliness of the community still inspire you as much :slight_smile: Your little mascots put a smile on your face and that's already essential!
Discover the proposals: myCAD Challenge 2022: Imagine the new myCAD mascot

For all those who still want to participate, it's here and it's before December 9, 2022: myCAD Challenge 2022: Imagine the new myCAD mascot

I also remind you that if you wish to be a member of the jury during this competition, you can register in the "challenge jury" group

Good luck to all! :star_struck:
Coralie

2

Damn, I thought I read that it was until December 24th...
I created a mascot a long time ago but I'm struggling with the design of some parts...

3

Hello @Sylk ,

Oh damn sorry... However, I am sure that it took me until December 9 for the winners to have their gifts for Christmas :santa:
You can still publish your design even if it's not finished the way you wanted, the main thing is to understand your idea :slight_smile:

1 Like
4

Hello @Coralie and thank you.
Oh and I have a logo too, for even longer... :sweat_smile:

EDIT: I posted the logo, at this stage of dev.

1 Like
5

I too have had a hobby since beautiful mirette!!
I still hesitate to show it, maybe one day, roupette a night without sunless

6

But don't hesitate!! :wink:

7

Hello @tous
I can't seem to post my proposal

Screenshot_20221128_131310_com.hsv.freeadblockerbrowser
Screenshot_20221128_131310_com.hsv.freeadblockerbrowser999×818 105 KB

What exactly are file types,
Try with a zip of a pak, an assembly alone, a step
None of them seem to work!

8

Screenshot_20221128_133133_com.hsv.freeadblockerbrowser

Is Solidworks 2022 not supported!?

9

Hello @Lynkoa15
It's not the file type that's the problem. It's the waiter who is capricious. He had relieved me for a while before deigning to accept the files (png and zip). I don't know if it was the preview files or the zip, but after several attempts it finally passed. Maybe the upload that goes wrong and corrupts the file from time to time.

2 Likes
10

Finally managed to post
Thank you sylk
On the other hand, it went with a .step not with SW files!

11

Hello @Lynkoa15 ,
Indeed the site is acting up, in the future we will respecify the type of format we want for the challenges!
Thank you @Sylk for the answer :slight_smile:

2 Likes
12

While specifying the types of files you want is a good idea, a server that accepts them is an even better idea. :stuck_out_tongue_winking_eye:

1 Like
13

Hello @ all
I am surprised by the number of proposals, their variety and their originality. Congratulations to all the participants! :+1: :+1: :+1:

For my part, I hope that my latest version has been submitted. :anguished:

Good luck to the jury to establish a podium. :sweat_smile:
And of course, may the best win!

1 Like
14

Congratulations to all, 27 proposals to the wow challenge!! :star_struck: The selection is not going to be easy...
The jury meets at 11am to decide on the winners, with the help of some of you who have sent us your choices!
PS: @Sylk your proposal has been updated :wink: Thank you for your participation!

Results in the afternoon!!
Good luck to all!
Coralie

2 Likes
15

Indeed good luck deciding between the proposals, I really like your myCAD-lady

1 Like
16

Hello everyone (especially the participants)

Don't hesitate to get tired of comments to each participant because this part of the site does not allow you to put small Emojis.

The dynamic around the competition is nice, isn't it!

See you later
Kind regards

PS: I love the proposal of the future winner

1 Like
17

Thank you @DoubleL , your creations are very successful too! It's nice to have imagination but you also have to be able to model them, which you were able to do very well. Well done.

PS: I have a big doubt about my logo, I see that the final model has not passed in the viewer so I wonder if I have correctly sent my final zip (with the clean prt including round version and the flat version) :flushed: My 1st challenge so I discover (and suffer) the peculiarities and whims of the server. I'll know at least for another time.