How do I create PDFs of the different views on Solidworks Composer?

Out of category
1

Once my project on Solidworks Composer is finished with the different views (normal views, exploded views, views with the Digger, etc.), how do I extract a PDF from each view to then be able to print them and make a technical document? 

Thank you for your help:)

2

See this link

http://www.lynkoa.com/forum/creer-3dvia-composer-pdf-plusieurs-pages-au-format-a4

@+ ;-)

1 Like
3

Thank you for your help but it's not exactly what I wanted.

I just wanted to print a PDF view of SW Composer and I found the solution but I thank you anyway, I'll keep the link at hand if needed. 

Good luck! :)

4

Hello

Situ have found the solution, thank you for sharing it. That way, if someone wants to do the same thing, they will at least have the solution because "I found the solution" won't help anyone...

5

Yes it's not wrong ac cobra 427, 

 

 so my solution to print a PDF view from SW Composer is to: 

- select one of the views (in the "views" tab) that you have created and that you want to print

- Open File

-print

- print in PDF 

That's the simple and effective little trick.