How do you create a sketch plane using 3 points? - CATIA

3D Design Volume Model
1

Hello

I tinker with Catia to discover the software.

I would like to remove material from a plane passing through 3 points in space (see image).

Do you have to create a plan and then sketch on it like in SolidWorks?

If so, how do you create the plans on CATIA?

Thank you 


catia.jpg
1 Like
2
Hi, a simple and illustrated tutorial:

http://catiatutorial.free.fr/plan.html

And on this same site there are many tutorials to get started on Catia.

1 Like
3

Hi @alain. ERP

see this link with x tuto de Catia to start

http://catia-tutorial.com/

+ those of the FOFO

http://www.lynkoa.com/tutos-cao?products[0]=Catia

@+ ;-))

1 Like
4

see also this pdf CNRS basic course

to allow knowledge to be shared

http://cfao-catiav5.grenoble.cnrs.fr/images/m_telech/cours/cours%20CATIA%20V5.pdf

which provides a maximum of walkthroughs

@+ ;-)

1 Like
5

and one of the bibles for me to understand how Catia works

http://catiadoc.free.fr/pdf/FR-Dassault-Systems_part_design.pdf

@+ ;-)

1 Like
6

Hello.

You have to create the plan.

We can cut directly by the plane (infinite section).

But if the cut is local, the sketch is created on the plan.

In your case you first have to create the two missing points (points on curve / stop)

Then the three-point plan.

 

2 Likes
7

Thank you, .PL, I knew a little about this site but I hadn't seen the creation of a plan.

Just to specify that you have to put the Reference Elements menu to see the Map icon appear.

Thank you gt22 for the tutorials (I already have them)

More questions to come on the subject...

1 Like
8

To illustrate a video


coupe-plan.mp4
2 Likes
9

Thank you Franck.Ceroux for the video which comes a little late

I'll give you the right answer to the next question!

Thank you

1 Like