How do I remove the bend radius value?

3D Design Volume Model
1

So, in a drawing of a folded sheet metal part, when inserting this part in unfolded mode, we see the bend note appear on the fold line (e.g. TOP 90° R10.5)

I would like this note to appear automatically without the R10.5.

 

Thank you for your answers

 

 

 


note.jpg
2

Hello

To modify the bending notes on the drawing, you need to edit the "bendnoteformat.txt" file in "C:\Program Files\SolidWorks Corp\SolidWorks\lang\French" or "C:\Program Files\SolidWorks Corp\SolidWorks\lang\English".

4 Likes
3

Everything is said.

 

Otherwise, you have to duplicate the bend table and create a new one by removing the "bend radius" line

4

I think it's like for the drillings: there is a txt file, see screenshots attached


note_pliage.png
5

Thank you FLOP, I just tried your technique but obviously it doesn't work, here is the file where I removed everything about bendradius:

 

**************************************************************************************************
* (c)2004 Solidworks Corp.
* Sheetmetal Bend Note Format Definition File
* Created: September 18, 2004
**
*Description:
**
**
**************************************************************************************************
**                        DISPLAY TYPE 1                        **
<bend-direction> <bend-angle> <bend-radius>
**<bend-direction> <bend-complementary-angle>  
<bend-direction-up>=TOP
<bend-direction-down>=DOWN

.... Did I do the right thing????

6

THANK YOU FLOP

 

IT WORKS VERY WELL....

7

You're welcome

You hadn't deleted the right <bend-radius>.

All you have to do is to pass the question into solved.

1 Like