Hello
I get an error message (attached) when I want to save in step.
If someone could help me.
2019-02-05_08h32_41.png
2019-02-05_08h32_41.png
go see the file he's talking about, it must be badly rebuilt (missing surface for example)
I don't have a way to display the entire link on the window.
Here is the error message:
SolidWorks Corporation - STEP Processor Error Log
______________________________________________________
STEP Post Processor
___________________
___________________
STEP File Name: Z:\1-Clients\18AT_PARKER\18AT040_etude_ergonomique\project\3D-COPY\sets\SIMULATIONS-suite-meeting-8-02-18\2-simulation-2operators-T7GBR (trsf step). STEP
Tolerant model: start of curve off by 0.000112935
Tolerant model: start of curve off by 0.000341261
Tolerant model: end of curve off by 0.00462044
Tolerant model: start of curve off by 0.000351095
Tolerant model: start of curve off by 0.000361444
Tolerant model: start of curve off by 0.0019725
Tolerant model: end of curve off by 0.0042107
Tolerant model: start of curve off by 0.000610044
Tolerant model: start of curve off by 0.00115454
Tolerant model: start of curve off by 0.000268576
Tolerant model: end of curve off by 0.000374768
Tolerant model: start of curve off by 0.000654664
Tolerant model: end of curve off by 0.00177984
Tolerant model: end of curve off by 0.000204303
Tolerant model: start of curve off by 0.000356785
Tolerant model: end of curve off by 0.00150003
Tolerant model: start of curve off by 0.000139312
Tolerant model: start of curve off by 0.00104998
Tolerant model: end of curve off by 0.000405212
Tolerant model: end of curve off by 0.000249262
Tolerant model: start of curve off by 0.000122221
Tolerant model: end of curve off by 0.000162812
Tolerant model: end of curve off by 0.0269196
Tolerant model: start of curve off by 0.000204303
Tolerant model: end of curve off by 0.000249261
Tolerant model: start of curve off by 0.00341745
Tolerant model: start of curve off by 0.000446227
Tolerant model: end of curve off by 0.000188695
Tolerant model: start of curve off by 0.000767042
Tolerant model: end of curve off by 0.000463172
Tolerant model: start of curve off by 0.000229288
Tolerant model: start of curve off by 0.000145543
Tolerant model: start of curve off by 0.000972411
Tolerant model: end of curve off by 0.000765033
Tolerant model: end of curve off by 0.000152079
Tolerant model: end of curve off by 0.000208285
Tolerant model: end of curve off by 0.00156411
Tolerant model: start of curve off by 0.000307095
Tolerant model: end of curve off by 0.000658894
Tolerant model: start of curve off by 0.000179523
Tolerant model: end of curve off by 0.000179669
Tolerant model: start of curve off by 0.00017584
Tolerant model: end of curve off by 0.000240367
Tolerant model: start of curve off by 0.000145942
Tolerant model: end of curve off by 0.00061893
Tolerant model: start of curve off by 0.0157706
Tolerant model: end of curve off by 0.00153251
Tolerant model: end of curve off by 0.00462044
Tolerant model: end of curve off by 0.0118228
Tolerant model: start of curve off by 0.000512095
Tolerant model: end of curve off by 0.000247296
Tolerant model: start of curve off by 0.000226597
Tolerant model: end of curve off by 0.00556073
Tolerant model: start of curve off by 0.000101276
Tolerant model: end of curve off by 0.000404411
Tolerant model: start of curve off by 0.000390534
Tolerant model: end of curve off by 0.000256631
Tolerant model: end of curve off by 0.00372841
Tolerant model: start of curve off by 0.0165827
Error: Inconsistent Spline Surface
STEP: Exit was not completed correctly.
STEP: Exit was not completed correctly.
How can this be remedied?
Have you imported STEP files of parts to put in your assembly?
There must be a screw, nut or other imported part in step that is not well constructed.
1 Like