How to include reactions in the Simulation Report

Simulation Generality
1

Hello

On a base I fixed the holes and added forces at a distance. Everything is going well, I have the deformations, the efforts, ... On the other hand I would like to recover the forces in the bindings.

I make the resultant forces appear on the different surfaces in my graphic window by checking the reaction option, but it is impossible to make them appear in the report.

Does anyone have a solution?

The only solution I found is to take a screenshot...

A+

1 Like
2
  1. http://help.solidworks.com/2014/french/SolidWorks/cworks/t_generating_a_report.htm
  2.  Click Report (Simulation Command Manager).
  3. In the dialog box, under Report Sections, do the following:
    1. Select the sections you want to include. Uncheck the ones you don't want to include.
    2. Add comments and select options for each included section. Select an object from the list, and then update the information under Section Properties.
  4. Enter the Header Information. This information appears at the beginning of the report and at the top of each page.

     

     Engineer/Designer 
     Enterprise 
     URL 
     LogoBrowse for a *.bmp, *.gif , or *.jpg file . 
     Address 
     Telephone 
     Fax 

     

  5. Under Document Settings, do the following:
    1. Refresh the Report Publishing Options and Document Name.
    2. Select View Report After Publishing to open the report after publishing.
    3. Select Include Existing Images to copy some or all of the images that have been added to the Images folder with Include Image in Report.
  6. Do one of the following:
    •  Click Apply to save the changes and continue editing the report.
    •  Click Publish to save the changes and generate the report.

To change the default sections for any type of format, click Simulation > Options . On the Default Options tab , click Report. Select the Report Format, Report Sections, options, and then click OK.

The available report templates can be found in SolidWorks_install dir\Simulation\data\cwreports.

 

@+

2 Likes
3

Hello

Thank you for your answer, but it doesn't work. All sections of the report are checked.

But on the other hand in the list of results, with the plot of stresses, deformations and displacements I never see the display of the list of my efforts like my other results?

A+

 

4

don't understand why it doesn't work watch this video

https://www.youtube.com/watch?v=PU7a9qCWbTo&index=20&list=PLD3B247BB4E61E500

http://www.leguide3d.com/profiles/blogs/les-options-param-trer-en-simulation

yet this is the procedure

Do you have a workstation

Pro Graphics

How much ram

is the office pack compatible with the SW version

under what windaube

@+

1 Like