How do you group the same parts in the nomenclature?

3D Design Volume Model
1

 

Hi all

As you can see on my nomenclature, the 6x20 screws marked 503, are not grouped on the same line.

What for? How do I get them grouped together?

Namely, those that are by 2  lines 24, are part of an assembly!

Thank you...

 

1 Like
2

Hello

I'm not in front of my PC but if you click on the nomenclature and you go to the left of the screen in the options you should find something in there and maybe see if all the panes are expanded with the options...


nomenclature.png
1 Like
3

Look at it in the help:

http://help.solidworks.com/2012/French/SolidWorks/sldworks/t_BOMCombining_Like_Items_in_BOMs.htm?id=9fe5f3a6c7714f2aae287d739f43ff57#Pg0&ProductType=&ProductName=

1 Like
4

Hello

Yes, it's visualization as a set and a subset.

You have to go through the flat in person, and then the quantities will be good and grouped together.

(See post of ac cobra 427)

When creating the BOM, you must select the "list of first-level parts only" or "parts only" according to the desired tree.
And then select "Show as a single article.. "

1 Like
5

Thank you to all 3, and a special congratulations to ac cobra!!!

Tomorrow I'll have another question in the same style...

Thank you again.

6

Why all 3?

7

There's @ac cobra, @Azrod and...?

;))

2 Likes
8

There's @ac cobra, @Azrod and...? AC COBRA!! Loool, that's 3 Alain...;)))

1 Like