Convert a step into sheet metal with different bend radii

3D Design Sheet Metal / Machine Welded
1

Hello

I want to unfold a step and this one has a radius of 80mm and another of 50 and when I choose the second fold it doesn't work anymore "try a smaller radius".

Isn't there a way to unfold 2 different shelves in the same room with convert to sheet metal??

Kind regards

2

@ l.moreau

a picture is worth a thousand words ;-)

post your file to see if it's possible

@+

1 Like
3

the part in question


capture.jpg
4

Hello

Personally, since the part is not complex. You will also quickly model it. You won't waste time and in addition you will have a native file that is much more stable over time and can be configured at will.

1 Like
5

you can post the stp file

I just did a test on a part created in volume

which I converted into sheet metal

with 2 diff radius

and it works without a problem

@+ ;-)


piecel.moreau.sldprt
2 Likes
6

Thank you gt22 me too it works I redesigned the sheet metal with r80 and r50 converted into step reopened and the log unfolds it for me.... The original step is bad surely on the 80 fold I was forced to FR an extru and a pocket to put the right side back maybe that's where it screws up it joined maybe not well with the next face.

Remrem  I have a lot of pieces like this and it's going to be a waste of time every time.

1 Like
7

Hello

Just use the inserted folds function.

1 Like