Hello
I would like to insert a standard DIN connector on a solenoid valve.
I can insert the connector with the cable, but not connect it to the solenoid valve.
Does anyone have a tutorial, because I couldn't find anything on the web.
Thank you
Eric
1 Like
Hello
Maybe these two tutorials can help:
https://www.youtube.com/watch?v=OIUZMsv5YK8
https://www.youtube.com/watch?v=VIK68DrKVJQ
Hello
Thank you for this feedback, but these tutorials are to create a DIN RAIL, and not a connector.
Eric
You must have routing points and connections on each element
Watch this webcast
https://www.youtube.com/watch?v=jBG8YI1C8G4
See also this one at the 59th minute you visualize how to create the routing and connection points
https://youtu.be/MAwoFjIUlr4
2 Likes
In Routing / Routing Tools, create connection points and a solenoid valve routing point.
Then, it will connect to the cables
1 Like
GT22 and Alain. Erpc,
These tutorials help me for the 3D part, it becomes clearer.
What if we stay in the 2D (electrical diagrams)?
Thank you
@ Eric 69
if you look carefully at the tutorials I posted you will find both for 3D and 2D (diagram)
the first one gives you the wired links
the second are routing links
the rest is to be declared by holding and ending
http://www.cadimensions.com/blog/item/84-routing-harnesses-in-solidworks-electrical-3d
https://www.youtube.com/watch?v=5H5w1gKDqhg
1 Like
Indeed, we had to take the time to watch the video in detail
Thank you
1 Like
And yes @ Eric 69
he whistled to watch the videos everything is there ;-)
a solved answer corresponding to the correct walkthrough
helps others and has good reading of problem solving
@+
1 Like