Creation of table loss by folding sheet metal

Out of category
1

Hello

I got a table of loss at the bend according to the chart of a press brake which takes into account the material (stainless steel/steel), the thickness of the sheet (from 0.6 to 10mm) and the bending angle (from 0° to 180°).

I would like when you select the sheet metal function:

- that we check "use a template table" and that we choose my table

- that you choose the thickness of the sheet as well as the bending radius via a drop-down menu

from these choices results in an unfolded sheet metal correct in accordance with the abacus.

I have already done a similar thing in the past that worked very well but now, I can't do it.

Can you help me?

Nico.

PS: I'm on SW2015, I'm attaching the table


tableau_perte_au_pli.xlsx
2

Hello

Have you looked at these links:

http://help.solidworks.com/2013/French/SolidWorks/sldworks/c_Sheet_Metal_Gauge_Tables.htm

http://help.solidworks.com/2015/french/SolidWorks/sldworks/c_sheet_metal_gauge_bend_table.htm

http://www.lynkoa.com/forum/3d/tables-de-gabarits-tolerie-par-defaut-0

 

 

1 Like
3

Thank you.

Now I have an error message

"Unable to read data from the table

Make sure that the Sheet Metal entry is added to the table"...

Now, I don't see...

4

In this link I had given our steel template table and the steel bend loss table, as well as the method to be carried out.

http://www.lynkoa.com/forum/3d/perte-au-pli-et-facteur-k-avec-une-plieuse-cn-amada

 

If it can help you

1 Like
5

It might be interesting and more polite to explain your solution in case someone has the same problem.

8 Likes
6

How did you do it? we're interested!

2 Likes
7

+1 @ sbadenis

May the force be with you

1 Like
8

 @ng

I vote -1

for the simple reason that the answer given does not correspond in any way to the question 

I found the soluton .............................. is not an answer and helps no one

so +1

@+ ;-(

4 Likes