Hi all.
After an unsuccessful search on the site I ask you the question is it possible to transform an elbow into sheet metal finally to be able to unfold it.
In fact I made a cut in an elbow and I would like to be able to make a pattern so that the line can be made, in real life.
See attached file.
Thank you in advance.
lynkoa_coude_sms_104x2_15d_spd.sldprt
The same ^me file in STEP if needed.
lynkoa_coude_sms_104x2_15d_spd.step
gt22
November 4, 2014, 8:11am
4
makes a screenshot + easy to read for everyone
If it's a Nada bent elbow
if it's an OK section elbow (fan sheath)
@+ ;-))
1 Like
gt22
November 4, 2014, 8:16am
5
for me impossible to do
SW doesn't know how to unfold deformed sheet metal
Sorry
@+ ;-((
1 Like
bart
November 4, 2014, 8:24am
7
Solidworks does not unfold a curve. It unfolds only curves.
For this you have "Logopress" which in combination with soliworks allows you to go further in sheet metal bending.
2 Likes
Possible with SolidWorks 2015 Premium
There is a new surface flattening function. (The quality of the results is to be tested!)
See attached image of the result
There is also a possibility with the product from Logopress
image_1535.png
4 Likes
gt22
November 4, 2014, 9:04am
10
@ ACO there you surprise me at least SolidWorks 2015
The fact is that we have to check the validity of the thing
From this unfolded to make a hello elbow
@+ ;-))
2 Likes
pl
November 4, 2014, 9:09am
11
Hello
To complement what @Bart says, there is a 14-day trial version of Logopress that can be found here:
http://www.logopress3.com/fr/trial.php
1 Like
gt22
November 4, 2014, 9:22am
13
@ Benoit thank you for the link
that's what we call Craftsmanship with a capital A
but today it's over or for museum pieces
or some prototypes but the synthetic has taken over now
No more super sheet metal boilermakers
it's like all the time it's money
and time is very expensive in our time
@+ ;-))
1 Like
Thank you all for your contribution.
Have a nice day.
2 Likes
bart
November 4, 2014, 10:48am
15
It's lost nowadays, but crafting must remain a basic pillar!
First learn by hand before using sophisticated tools.
Before using CAD software, make pure tests with T, squares, etc...
Exploded view at the Rotring and so on.
The same goes for wood or metal. Knowing how to work with your hands without a machine is important!
When you see what our ancestors managed to do just with a hatchet and a pencil, it makes you think about our manual abilities....
2 Likes
Have you known the Rotring?!?!
2 Likes
bart
November 4, 2014, 11:00am
17
Well yes why?
I'm not 12 years old:p
Basically, I make copies of antique furniture. So I know the drafts! ^^
2 Likes
Oh, I'm older than you (not by much !! :) ) and rotrings were already a memory of the old ones when I started working in BE machines spec a little over 10 years ago!
bart
November 4, 2014, 1:07pm
20
We didn't have the same journey. =)
I studied art, so rotring was de rigueur!
In my school, there were no computers. Everything was done by hand except for some machining which was done with machines from another time =)
Nothing beats manual work! ;)
Gt22, it slams your rotrings!! Will you give them to me? :p
1 Like