Developing a Swept Bent Sheet

Out of category
1

Hi all 

I have a problem when I develop a swept bent sheet, SW does not take into account the shape of the part. For example, for a cone trunk, the press will be rectangular...

I am putting you in attachment the piece I would like to develop.

Thank you in advance to those who will take the time to answer me, have a good day.


demi_cone_recouvrementcuve.sldprt
2

Hello

you have to tick cylindrical/conical body in the function "Swept bent sheet1" and select an edge as attached and in the attachment


une_tole_pliee_balayee_conique.sldprt
3 Likes
3

Hello @Ac cobra

I had spotted the function that had not been checked but I can't unfold the part because it refuses to select the fixed side.

I'm talking about the piece you reposted because I have the same pb on the @tibcapelli

Although I have completed sketch three with an axis stroke.

Hey Mr. Magician, how do you create the unfolded   ;-)

Kind regards

4

Good evening Zozo_mp,

You must select a sketch line in the feature and not a face. I couldn't open the thibcapelli piece because I'm under 2016 but I was able to visualize it with Edrawings, that's why I recreated a piece and I suspected that it was this function that was not checked.

2 Likes
5

Thank you bcp ac cobra 427, good evening