Hello
I would like to know if it is possible to put formulas (conditions) in a drilling table of a drawing?
My tool being configured, I would like the drawings to update automatically.
Ex: My finite Ø is = 3 (in one cell) so my roughing Ø must be 1 (in another cell)
Hello
I suggest you make a configuration of your part with 1xl e Ø fibal and 1x with the roughing Ø. Then after you make a MEP with the piercing table but with the finished part in the MEP and the other one you will place it outside the MEP to make the painting and if it bothers you outside. I sometimes place it next to the cartridge but with a scale of 1:100 so that you can only see one point... It's a hack but it works quite well....