Splitting a Solder Table

Out of category
1

Hello

Is it possible to split a weld table in a drawing?

1 Like
2

Right-click on the row in the table, split above or below

3

it works for a bill of materials but not for a welding table

 

4

So, after a little test on a mechanically welded part, the table splits like a normal nomenclature ...

1 Like
5

You have to see with the model in question to put online so that you can study it

 

1 Like
6

You need the room and the corresponding drawing of course.

1 Like
7

It is on the 3rd sheet of drawings


mep_19_bati.slddrw
8

It is on the 3rd sheet of drawings


prt_19_bati.sldprt
1 Like
9

I don't know what's been going on since the beginning with this building, everything is going wrong!

2 Likes
10

Hello

It is indeed possible to split the bills of materials and the lists of welded parts but not the welding tables (SW2017) on the other hand you can combine the welds of the same type, the welds are then grouped by type and size and not by type, size and length, so you only have 2 lines left. See here.

Or you have to change the format of the sheet (A2 instead of A3).

Kind regards

1 Like
11

I in 2016 split my table without any problem, that's why I posted my answer.

(see screen preview)

EDIT: Sorry answered too quickly, it's not a soldering table...


table_liste_pieces_soudees.png
2 Likes
12

The soldering table or the welded parts list table?

2 Likes
13

Hello @ Christophe

small remark ;-)

the 4 M103 clearance holes on the table 

eat the wing of your square tube 20*20*2.6

not great in terms of meca resistance ;-(

ditto adjustment at the end of the table I wouldn't have done it in this direction ;-(

@+ ;-)

1 Like
14

I'll take a look at it tomorrow, thank you very much.

2 Likes
15

Sorry, I had misread the question...

For the welding tables, I'm going to test

PS: Combining the same types of solder saves a bit of space.

1 Like
16

No way to split the welding table (SW2016 version).

On the other hand, you can always reduce the character fold in size and then reduce the height of the lines accordingly.

1 Like
17

PS:

Right button on the table;

"Fitness"

"Adjust the text"