Hello
I encounter some very slow times in Solidworks.
When I try to open the sheet properties of my plans (to change the scale of the sheet or the format), the window only opens after several minutes.
Has anyone ever had this type of problem? (and especially to a :) solution)
Have a nice day.
If you migrated not long ago, you may have a problem with hatching.
SW 2020 (and a priori some previous versions), don't like hatching at all with a lot of strokes and a big scale factor.
We had to go back to all our materials to get rid of the 'houndstooth' and go from hatching with a factor of 32 to plain hatching (which doesn't work well either but at least it doesn't grind)....
See SPR 1156484 (still open so same in SW2021)
Thank you for your answer, unfortunately, it must not come from that, I also have the problem on a blank plan.
Could it come from a symbol badly managed by 2020 or something like that?
If you have hatching in your basic drawing... (or a moldy logo with lots of features).
Have you tried with the MEP and SW default cartridge?? If you don't have any problems with these, the problem comes from your base files.
To find the culprit, delete (or hide) elements of your cartridge until you regain normal fluidity. That's how we found the problem with the 'special' hatching: by hiding parts until we found fluidity.
I tried to delete everything and I still have this problem.
It must not come from the cartridge itself as a result.
I'm going to recreate my templates from the blank templates, I hope it will work.