Dotted line for cutting on drawing

2D plans Layout
1

Hello

When I do a drawing, my sections don't have a line connecting them.

Document Properties

Cross-sectional views

DIN and position n°3 with the arrows under the cutter bars.

 


probleme_sur_coupes.pdf
2

Hello

I've already torn my hair out over this problem,

You have selected the "standard without connectors" mode (right icon)
You must select the "standard with connectors" mode (left icon)

Next, you should know that the cut stroke is defined by the stroke style of the layer.
=> In my opinion, you should select "-none-" in the layer. Otherwise it's a hassle to manage, or create a special layer for the dotted lines.

It should work.

2 Likes
3

Thank you for the answer.

I'm going to do it like this but I don't like the visual too much

The arrow in front of the cut line and the letter still in front is average I think.

4

I don't understand, don't you have that as a result? (See attachment)


17-12-2018_10-22-43.jpg
5

No

SEE THE ATTACHED DOC


probleme_sur_coupes_2.2.pdf
6

Ok, understood,

Try the same thing after having previously changed the General Skin Standard to "ISO" or "DIN" depending on what suits you best

1 Like