Different list of welded parts (solved by itself...)

3D Design Sheet Metal / Machine Welded
1

Hi all
I have a little problem with my structure.
The MEP welded parts list does not match the one in the !!

2023-01-09 16_18_57-Window
2023-01-09 16_18_57-Window1920×1040 206 KB

I tried this:

  • redo the drawing from A to Z → no change
  • restart SW → no change
  • restart the PC → no change
  • SW cleaning with SolidWorks RX → no change.

If anyone has already had the problem and has a solution, I'm interested in that too...

2

Hello a.eriaud,

First of all, my best wishes...

We have version 2002 SP4. For my part, when I have this kind of problem, I do the following steps:
1 - In the 3d part I remove the nomenclature of welded parts
2 - I reform the nomenclature of welded parts
3 - I update this nomenclature
4 - In the MEP I delete the nomenclature and I reinsert it
5 - And it works after all that.
6 - It may also come from a configuration or matter in bodies that is different from the entire model.

I'll take screenshots if necessary.
If it's possible to make your model available I can take a look.
Good luck.
@+
AR.

1 Like
3

Wouldn't the option to keep the missing item enabled!?
(table pane)

4

Hello, and yes it's the season: best wishes to all.
@A.R , I tested this manip → no change
@Lynkoa15 , the checkbox is unchecked.

For your information, this line corresponds to a tube that is repeated by double plane symmetry.
I just forced the reconstruction of this function, it didn't change anything on the part but the MEP is updated! However I did click 1000x on the rebuild icon!

Problem solved, thanks for your help.

7

Is the update of the welded parts list on Automatic:
image
This may be the reason (if not checked)