Hello
I am looking for the option that allows you to change the radius dimension line to a broken tie line with horizontal text and those permanently.
Can someone please inform me?
Thank you
Gautier.
See this tutorial among others
http://www.lynkoa.com/tutos/3d/outil-de-cotation-dans-les-mises-en-plan
@+-))
It's in Option / Document Properties / Dimensions / Diameter and set the "Text Position".
cotation_diametre_h.jpg
4 Likes
It's in Option / Document Properties / Dimensions / Diameter and set the "Text Position".
cotation_diametre_h.jpg
It's in Option / Document Properties / Dimensions / Diameter and set the "Text Position".
cotation_diametre_h.jpg
1 Like
When I carry out this operation alain, it changes me as I want but only on the open document. I want to change it for all the drawing documents.
Hello, you will have to go to the document properties, then save the document template for each format.
See here:
http://help.solidworks.com/2012/French/SolidWorks/sldworks/Document_Templates.htm
Or here:
http://help.solidworks.com/2012/French/SolidWorks/sldworks/Customizing_Sheet_Formats.htm
3 Likes
As @PL says, you need to create a drawing with just the title block and the document options that you want to keep and save that drawing as a document template.
It's okay, I found the error.
We have uniform document styles for all our Solidworks workstations. My colleague had them too but I don't know what he touched but the file locations have disappeared (especially the skin standards). I put all this back in place and it works.
Thank you.
1 Like
I sometimes have the problem (we have a fairly basic network: no real server powered on 24/7): it is enough that the network paths are not active when SW is launched for the file locations to clear.