Hello
I have a slight problem with inventor and I can't do a flat outing.
As an attachment the part I want to flatten, it was created with autocad and then exported in .sat.
I have no problem opening it with inventor and converting it to sheet metal, where it gets stuck is that it is impossible for me to define the A side and that if I simply have it created flattened, my ferrule remains as it is.
Could you help me please?
Moloko.
See this link
http://help.autodesk.com/view/INVNTOR/2016/FRA/?guid=GUID-772414ED-A283-4A02-878E-AD0A114F5BA3
https://www.youtube.com/watch?v=xYwqiqdMBRs
https://www.youtube.com/watch?v=CkQWkYGfRRU
@+ ;-)
Thank you I already have this link, it says to indicate the A side first, no matter how much I click on the button define the A side, I can't choose any side of this room...
I solved the problem in the following way:
After importing, I immediately converted the part into sheet metal.
I set the sheet metal ruler and the material.
I place a median plane between the two ferrule openings and a point perpendicular to the latter.
Then I can set the A side.
I solved the problem in the following way:
After importing, I immediately converted the part into sheet metal.
I set the sheet metal ruler and the material.
I place a median plane between the two ferrule openings and a point perpendicular to the latter.
Then I can set the A side.