Hello, following an image recognition my sketch is in automatic resolution mode disabled. how can it be activated, because it prevents you from dragging the dots
capture_mode_auto.jpg
capture_mode_auto.jpg
Have you read this link
http://help.solidworks.com/2013/french/SolidWorks/sldworks/t_Using_Automatic_Solve.htm
It seems that you can see if it's active or not
@+
2 Likes
Hello
click on Tools/ Sketch Settings/ Auto-Resolution.
4 Likes
@gt22, sorry I replied at the same time. But the answer is the same.
1 Like
No problem 1 minute depending on the meter
but the answer is surely good since there are 2 of us to give the same answer :-)
@+ ;-))
1 Like
In general, I make an image insertion that I scale to the desired line on a sketch
then I take back with lines all the lines whether they are curved or not, I zoom in as much as possible to be at best in the center of the pixelation
Once back in normal display you only see DAL
and it's super fast and at least you're sure that all your dots and lines come together as they should
To meditate on maybe ;-)
1 Like
@gt22 yes I realize that there is a double sketch and a lot of lack of coincidence. It's a first get with a pixelation of 2400dpi and a very low tolerance.
The recognition is very well done but you have to readjust certain points.
I allow myself to validate Sebastien, because this answer is in direct sight even if the one of GT22 is the same but refers to another page.
1 Like
Same problem..... but I'm ashamed, I can't find TOOLS..... :(
Click on the black arrow:
Then:
The tools menu appears.
1 Like
tool is in the menu bar at the top
Tap the arrow next to Solidworks in the top left
The menu changes
or Auto Relationship Search in the Search tab
@+
1 Like
OK great! THANK YOU!!!! :) :)