Hello,
I made a rough piece in which there are pin holes and screw hole holes.
Then I use this blank to make another definitive part on which I add other machining.
But I have a problem when I want the drawing of my final part, I use the " symbol for drilling " function. And there! I can't put the adjustments with tolerances, the number of holes...
Would you have a solution to remedy this problem?
Thank you
Cdt
Fred
1 Like
Hello,
The final part contains the holes of the blank + those created afterwards?
How were the holes made on the model?
On other MEPs, does the " Symbols for Drilling " function work?
See if SW finds the calloutformat file.
1 Like
Hello,
If you have inserted a part into a part, there are options for what you import and what you do not import in the ' insert part ' function.
In particular, you can import all the sketches from the base part (and therefore import them back into your final part MEP).
1 Like
The final part contains the holes of the blank + those created afterwards? YES
How were the holes made on the model? YES
On other MEPs, does the "Symbols for Drilling" function work? YES
See if SW finds the calloutformat file. How can I find this information
1 Like
Hello,
If you have used the part-in-part function, check by editing the function whether " Drilling wizard data" has been checked in the elements to be imported.
1 Like
How were the holes made on the model?
- My question is if the piercings were done with the assistant?
See if SW finds the calloutformat file. How can I find this information
- If it works for other parts on other MEPs ==> SW finds the file
Can you broadcast your play? Or at least a " definitive " piece that reflects your working method?
For my part, I am working with SW 2023
1 Like
@Silver_Surfer
If you have used the part-in-part function, check by editing the function whether "Drilling wizard data" has been checked in the elements to be imported. when I check this box it calculates the number of holes, but I don't have access to H7 tolerances... ext.
@Le_Bidule
How were the holes made on the model?
- My question is if the piercings were done with the assistant? YES
See if SW finds the calloutformat file. How can I find this information
- If it works for other parts on other MEPs ==> SW finds the YES file
Can you broadcast your play? Or at least a "definitive" piece that reflects your working method? NO SORRY
For my part I work with SW 2023: ME SW2020
NO SORRY
Well, 
end of the project
Like this?
Yes