Hi all
I created functions in the formats . SLDLFP and when I add them into my parts, I can't seem to rotate them.
Do you have a solution for me, please?
Thank you
capture.png
capture.png
Hello
You have to edit the sketch of the cut and orient it as needed.
Hello
Thanks for the solution, but for several functions in the same file it doesn't work.
Do you have a solution?
I'm not sure I understand. I imagine that for each function we orient our sketch, which works very well.
1 Like
Depending on the sketch, it is possible that it does not want to change its orientation -> you have to update the library function to have a sketch that can rotate without making a mistake (this could be the case if there are still horizontalities for example)
2 Likes
Hello
in this case an angular reference must be added.
Go open the function in the library
Remove all vertical and horizontal constraints
Stabilize the sketch with relative constraints like this example by avoiding green and horiz.
Then add the angular stress
Validate and then save by ctrl + s.
Then go and place the function on the face concerned.
Show him who the references are. Check the dimension modification and then change the angle.
Do this on the other functions if needed.
2 Likes
Hello
That's perfect, thank you.
A little tutorial, on the spot! :)