how could I turn my sketch into new folds please
210012m1410010.sldprt
Hello
For my part I used the sketch as a layer and I redid two folds on edges, then I modified the sketch of the folds
Kind regards
screenshot_3.jpg
210012m1410010.sldprt
Hello
On my side, I would have treated the fold on a single edge, and with welding points if necessary on the inclined edge. In two times, you may have trouble getting your two folds perfectly aligned.
I proceeded like this:
Offset of the reference face of the green sketch tone of 2.2mm (sheet metal thickness + a small set).
Preparation of the notching areas (given your shape, SW will have a hard time doing anything clean)
Create a crease on sketch with a 0.2 offset, by pasting this new sketch on your green sketch.
To have the two inclined edges taken in your shaping in a single operation, it would be more like stamping (but I don't know if this shape is feasible).
2022-06-10_08_31_47-solidworks_premium_2021_sp5.1_-_210012m1410010.sldprt__.png
2022-06-10_08_32_18-solidworks_premium_2021_sp5.1_-_210012m1410010.sldprt__.png
210012m1410010.sldprt