Hi all
I am in the process of setting up a mechanically welded construction, but on the elements I have in SolidWorks 2014, the dimensions available to me are not sufficient. In other words I don't have the HEA 300x300 beam.
How to get more choices
1 Like
gerald
April 12, 2015, 3:43pm
2
If only this one is missing, you can edit the sketch, modify it and save it in the format. SLDLFP
or extract the attached sketch file and do the same thing as before
standard_h_and_i_beams.dwg
2 Likes
pl
April 12, 2015, 5:25pm
3
Hello
HEA beams are available for SolidWorks on Lynkoa, see here:
http://www.lynkoa.com/store/fr/biblios/profiles-mecano-soudes/bibliotheque-profiles-poutres-hea.html
1 Like
I recreated all the welded construction profiles in configuration (New SW2014):
5 Likes
Thank you .PL,
To get to this point, he tells me that you have to be a private member. How to do it?
gerald
April 13, 2015, 11:28am
6
same for me.PL
As I am no longer a MyCadService subscriber, I no longer have access to it.
bart
April 13, 2015, 12:35pm
7
A similar question already exists, but I can't find it.
Here is the basis I use.
See if you can do something about it.
nf_a45.rar