Problem of calculating the length of welded parts

3D Design Sheet Metal / Machine Welded
1

Hello

I am having a problem with the editing of the list of welded parts.

With some of my profiles, the length of the welded parts is not calculated and returns a value evaluated as a " LENGHT@@@TUBE... ".

I guess this is a problem with the profile itself because for other profiles the length is correctly calculated.

I'm attaching some screenshots if you have an idea.

Note: I don't know where the profile library comes from, it's a legacy of my predecessor.

Thank you!!

2

Do you have this checked ?

 


prp-piece.jpg
3

Yes, the 2 boxes are checked.

I attach the file of the profile used if it helps.


30_x_30_x_2.sldlfp
4

I found it!!

This was a problem in the profile description

The description was set according to the dimensions of the style sketch

SQUARE TUBE "L1@Sketch1" X "L2@Sketch1" X "epaisseur@Sketch1"

Who had to return TUBE CARRÉ 30 x 30 x 2.

Except that the "epaisseur@Sketch1" coast did not exist.

So I replaced it with the correct "D1@Sketch1" rating for my case.

Then everything worked again...

2 Likes