Solidworks 2014 Graphics Problem - NVIDIA Quadro 4000

3D Design Volume Model
1

Hello, I have never had a graphical problem with Solidworks 2010, 2011, 2012, 2013.

 

The driver of the board is updated according to the version described on their site and the board is certified by Solidworks (without limitations).

 

What should I do to prevent graphical bugs as illustrated by arrows in my attached file?


probleme_graphique.jpg
2

See Performance option Open GL should not be checked

@+;-)

3

I just checked and emulated the functions open GL is not checked.

4

Your driver comes from solidworks (agreer) for the right OS version / year SW ....?

@+ ;-)

5

The driver is in order and updated according to the manufacturer's specifications.

 

I'm running a 3.2 GHz Xeon with 12 GB of RAM.

 

The control panel of my board offers a multitude of options (parameter of use with SW), but I have no idea which one to improve....


driver.jpg
6

Here is an example of the parameters (attached file)


parametre.jpg
7

obviously you are on a windows seven OS,

Try changing the Windows theme currently used to switch to an aero theme.

1 Like
8

Try uninstalling "nview", an NVIDIA product that, if this is your case, was installed at the same time as your driver

Some graphical issues come from this tool. I have experienced this

1 Like
9

Try uninstalling "nview", an NVIDIA product that, if this is your case, was installed at the same time as your driver

Some graphical issues come from this tool. I have experienced this

10

Try uninstalling "nview", an NVIDIA product that, if this is your case, was installed at the same time as your driver

Some graphical issues come from this tool. I have experienced this

11

Try uninstalling "nview", an NVIDIA product that, if this is your case, was installed at the same time as your driver

Some graphical issues come from this tool. I have experienced this

12

Try uninstalling "Nview" if it is present on your computer

This utility is installed by the NVIDIA driver setup

This NVIDIA utility sometimes causes SolidWorks graphics issues

I have experienced this

 

13

a bug 4 times the same answer in echo???????????????????????????????????????????????

14

Hello

 

Or is ACO asleep on his keyboard;) ;) ;) ;)

 

@+

1 Like
15

 

Hello

 

It could be that the graphics card of the motherboard takes over.

I advise you to disable the "Optimus" setting in the bios.

This will probably solve your problems.

 

a+

Guillaume

16

 

Hello

 

It could be that the graphics card of the motherboard takes over.

I advise you to disable the "Optimus" setting in the bios.

This will probably solve your problems.

 

a+

Guillaume

17

 

GT22

13 February, 2014 - 09:16 | Edit

a bug 4 times the same answer in echo???????????????????????????????????????????????

 

Same for Youner77

 

............................................ It's the thread of the post that wants that.................................................

 

 @+ ;-) ...; -)....; -)

 

18

Fthomas' answer seems to be working so far, I'm pushing my machine to the maximum ajd. and I check if a glitch shows up.

 

Thank you

19

Hello

I have the same graphics problem on an HP zBook 17 laptop and a Quado K3100M (certified drivers of course).

The default Windows aero theme is active & nView is disabled...

Have you found a solution to your problem?