Hello
I have to repeat certain parts in an assembly.
The problem is that I have to do a translation as well as a rotation, all cumulatively.
I can't use the "Pattern according to sketch" functions in an assembly and I can't find a "Cumulative Pattern" function (as I used at the time under Topsolid).
Thank you for your help
Hello
What should be the desired result, the components are both translated and then rotated or the components arrive directly at a final position that corresponds to a translation and then a rotation?
@+
The components must arrive directly in their final position which corresponds to translation and rotation.
There should be no intermediate step (if possible).
Re
So I would do the translation -> step 1 then the rotation of the component from step 1 -> step 2 and then I will delete in the linear repetition my component (delete not erase).
@+
That's what I thought I'd do, but by deleting my translation, it also removes my rotation (which is bound).
In fact, I was looking for a miracle solution of accumulating repetitions.
Re
You should not delete the linear pattern but the component or components that are inside that linear pattern.
@+
Well done, so much for me:)
Thank you very much Coyote, it works great!