SolidWorks/MyCadTools - Zastępowanie formatów arkuszy

2D plans
1

Witaj @all,

Szukam sposobu na zastąpienie istniejących formatów arkuszy innym formatem arkusza w zależności od rozmiaru (A0, A1, A2 itd.) w przebiegu wsadowym dla wszystkich rysunków w folderze.
Jestem zaskoczony, że nie mogłem znaleźć tej opcji w MyCadTools.

Z góry dziękuję.

Pozdrawiam Andreas

2

Można zastąpić/ponownie wczytać mapę bazową z integracją dla zestawu rysunków:

image
obraz1887×788 122 KB

Na górze jeden z możliwych warunków (lub wybierz systematyczny)
Na dole znajdują się różne możliwe opcje zmiany tła
Umieść kilka warunków (po jednym na format, jeśli to konieczne.

W przeciwnym razie możesz to zrobić za pomocą makra (tutaj ponownie ładujemy ten sam format z nowym szablonem-> do modyfikacji dla swoich formatów):

Option Explicit
'Site avec exemple: https://www.lynkoa.com/forum/mises-en-plan/modifier-une-note-sur-un-fond-de-plan-solidworks-avec-une-macro
Public Enum swDocumentTypes_e
    swDocNONE = 0       ' Used to be TYPE_NONE

    swDocPART = 1       ' Used to be TYPE_PART

    swDocASSEMBLY = 2   ' Used to be TYPE_ASSEMBLY

    swDocDRAWING = 3    ' Used to be TYPE_DRAWING
End Enum

Dim swSheet         As SldWorks.Sheet
Dim swApp           As Object
Dim swModel         As SldWorks.ModelDoc2
Dim swDraw          As SldWorks.DrawingDoc
Dim swModelDocExt   As ModelDocExtension
Dim sTemplate       As String
Dim stemplatepath   As String
Dim Count           As Integer
Dim vSheetNameArr   As Variant
Dim vSheetName      As Variant
Dim vSheetProps     As Variant
Dim bRet            As Boolean
Dim tolerie         As Boolean
Dim swView          As SldWorks.View
Dim userName        As String
Dim cDirTemplate    As String
Dim cTemplateA4     As String
Dim cTemplateA4_Laser As String
Dim cTemplateA3     As String
Dim cTemplateA2     As String
Dim cTemplateA1     As String
Dim cTemplateA0     As String
Dim cTemplateA0plus As String







Option Explicit
'Site avec exemple: https://www.lynkoa.com/forum/mises-en-plan/modifier-une-note-sur-un-fond-de-plan-solidworks-avec-une-macro
Public Enum swDocumentTypes_e
    swDocNONE = 0       ' Used to be TYPE_NONE

    swDocPART = 1       ' Used to be TYPE_PART

    swDocASSEMBLY = 2   ' Used to be TYPE_ASSEMBLY

    swDocDRAWING = 3    ' Used to be TYPE_DRAWING
End Enum

Dim swSheet         As SldWorks.Sheet
Dim swApp           As Object
Dim swModel         As SldWorks.ModelDoc2
Dim swDraw          As SldWorks.DrawingDoc
Dim swModelDocExt   As ModelDocExtension
Dim sTemplate       As String
Dim stemplatepath   As String
Dim Count           As Integer
Dim vSheetNameArr   As Variant
Dim vSheetName      As Variant
Dim vSheetProps     As Variant
Dim bRet            As Boolean
Dim tolerie         As Boolean
Dim swView          As SldWorks.View
Dim userName        As String
Dim cDirTemplate    As String
Dim cTemplateA4     As String
Dim cTemplateA4_Laser As String
Dim cTemplateA3     As String
Dim cTemplateA2     As String
Dim cTemplateA1     As String
Dim cTemplateA0     As String
Dim cTemplateA0plus As String







Sub main()
'Variable à remplacer lors d'un changement de fond de plan
'Constantes à remplacer lors de changement de fond de plan
cDirTemplate = " C:\xxx\xxx\Fond de plan C\" 'Mettre le chemin d'accès aux fonds de plans sous ce format: C:\xxx\xxx\
cTemplateA4 = "a4-c.slddrt" 'A renommer si vos templates s'appelle autrement
cTemplateA4_Laser = "a4-DECOUPE-c.slddrt"
cTemplateA3 = "a3-c.slddrt"
cTemplateA2 = "a2-c.slddrt"
cTemplateA1 = "a1-c.slddrt"
cTemplateA0 = "A0-c.slddrt"
cTemplateA0plus = "A0+-c.slddrt"



Set swApp = Application.SldWorks
Set swModel = swApp.ActiveDoc

If swModel Is Nothing Then
    MsgBox ("Pas de document ouvert")
    Else
        If swModel.GetType <> 3 Then
            MsgBox ("Il ne s'agît pas d'une mise en plan")
        Else
        Set swDraw = swModel
                Set swModelDocExt = swModel.Extension

        vSheetNameArr = swDraw.GetSheetNames
                For Each vSheetName In vSheetNameArr
                Debug.Print vSheetName
                
                        bRet = swDraw.ActivateSheet(vSheetName): Debug.Assert bRet
                        Set swSheet = swDraw.GetCurrentSheet
                        
                        'Ajout SD test nom template pas utile dans la macro (pour version future?):
                        Set swSheet = swDraw.GetCurrentSheet
                        sTemplate = Mid(swSheet.GetTemplateName, InStrRev(swSheet.GetTemplateName, "\") + 1)
                        Debug.Print sTemplate
                        
                        Set swView = swDraw.GetFirstView
                        Set swView = swView.GetNextView
                        'On récupère le nom de la config de la vue
                        Debug.Print "Nom de la vue" & swView.Name
                        Debug.Print "Configuration" & swView.ReferencedConfiguration
                        
                        
                        
                        vSheetProps = swSheet.GetProperties
                        Debug.Print "vSheetProps(0)=" & vSheetProps(0)
                        If vSheetProps(0) = "7" And swView.ReferencedConfiguration Like "*FLAT-PATTERN" Then 'A4
                            stemplatepath = cDirTemplate & cTemplateA3
                            bRet = swDraw.SetupSheet4(swSheet.GetName, vSheetProps(0), 12, vSheetProps(2), vSheetProps(3), True, stemplatepath, 0#, 0#, "")
                            stemplatepath = cDirTemplate & cTemplateA4_Laser
                            bRet = swDraw.SetupSheet4(swSheet.GetName, vSheetProps(0), 12, vSheetProps(2), vSheetProps(3), True, stemplatepath, 0#, 0#, "")
                            swModel.ForceRebuild3 (False)
                        ElseIf vSheetProps(0) = "7" Then 'A4
                            stemplatepath = cDirTemplate & cTemplateA3
                            bRet = swDraw.SetupSheet4(swSheet.GetName, vSheetProps(0), 12, vSheetProps(2), vSheetProps(3), True, stemplatepath, 0#, 0#, "")
                            stemplatepath = cDirTemplate & cTemplateA4
                            bRet = swDraw.SetupSheet4(swSheet.GetName, vSheetProps(0), 12, vSheetProps(2), vSheetProps(3), True, stemplatepath, 0#, 0#, "")
                            swModel.ForceRebuild3 (False) 'A2
                        ElseIf vSheetProps(0) = "8" Then 'A3
                            stemplatepath = cDirTemplate & cTemplateA4
                            bRet = swDraw.SetupSheet4(swSheet.GetName, vSheetProps(0), 12, vSheetProps(2), vSheetProps(3), True, stemplatepath, 0#, 0#, "")
                            stemplatepath = cDirTemplate & cTemplateA3
                            bRet = swDraw.SetupSheet4(swSheet.GetName, vSheetProps(0), 12, vSheetProps(2), vSheetProps(3), True, stemplatepath, 0#, 0#, "")
                            swModel.ForceRebuild3 (False) 'A2
                        ElseIf vSheetProps(0) = "9" Then
                            stemplatepath = cDirTemplate & cTemplateA4
                            bRet = swDraw.SetupSheet4(swSheet.GetName, vSheetProps(0), 12, vSheetProps(2), vSheetProps(3), True, stemplatepath, 0#, 0#, "")
                            stemplatepath = cDirTemplate & cTemplateA2
                            bRet = swDraw.SetupSheet4(swSheet.GetName, vSheetProps(0), 12, vSheetProps(2), vSheetProps(3), True, stemplatepath, 0#, 0#, "")
                            swModel.ForceRebuild3 (False)
                        ElseIf vSheetProps(0) = "10" Then 'A1
                            stemplatepath = cDirTemplate & cTemplateA4
                            bRet = swDraw.SetupSheet4(swSheet.GetName, vSheetProps(0), 12, vSheetProps(2), vSheetProps(3), True, stemplatepath, 0#, 0#, "")
                            stemplatepath = cDirTemplate & cTemplateA1
                            bRet = swDraw.SetupSheet4(swSheet.GetName, vSheetProps(0), 12, vSheetProps(2), vSheetProps(3), True, stemplatepath, 0#, 0#, "")
                            swModel.ForceRebuild3 (False)
                        ElseIf vSheetProps(0) = "11" Then 'A0
                            stemplatepath = cDirTemplate & cTemplateA4
                            bRet = swDraw.SetupSheet4(swSheet.GetName, vSheetProps(0), 12, vSheetProps(2), vSheetProps(3), True, stemplatepath, 0#, 0#, "")
                            stemplatepath = cDirTemplate & cTemplateA0
                            bRet = swDraw.SetupSheet4(swSheet.GetName, vSheetProps(0), 12, vSheetProps(2), vSheetProps(3), True, stemplatepath, 0#, 0#, "")
                            swModel.ForceRebuild3 (False)
                        ElseIf vSheetProps(0) = "11" Then 'A0+
                            stemplatepath = cDirTemplate & cTemplateA4
                            bRet = swDraw.SetupSheet4(swSheet.GetName, vSheetProps(0), 12, vSheetProps(2), vSheetProps(3), True, stemplatepath, 0#, 0#, "")
                            stemplatepath = cDirTemplate & cTemplateA0plus
                            bRet = swDraw.SetupSheet4(swSheet.GetName, vSheetProps(0), 12, vSheetProps(2), vSheetProps(3), True, stemplatepath, 0#, 0#, "")
                            swModel.ForceRebuild3 (False)
            ElseIf vSheetProps(0) <> "7" Then 'Pour les formats un peu exotiques non gérés
                            If vSheetProps(0) <> "8" Then
                            If vSheetProps(0) <> "9" Then
                            If vSheetProps(0) <> "10" Then
                            If vSheetProps(0) <> "11" Then
                            If vSheetProps(0) <> "12" Then
                                MsgBox "Le fond de plan ne correspond à aucune trame connue" & vbCrLf & "Aucun changement appliqué"
                                Exit Sub
                            End If: End If: End If: End If: End If
                        End If
                    Next
    End If
End If
swModel.Save2 (True) 'Sauvegarde des changements
End Sub

Aby zastosować makro do partii rysunków, można to zrobić za pomocą opcji Integracja
Z warunkiem na Systematic, a następnie operacją na Miscellaneous, uruchamiając makro.

3

Po wyeliminowaniu kilku błędów aplikacji z mojej strony, zadziałało idealnie.
Bardzo dziękuję i pozdrawiam z Czarnego Lasu/ Niemiec
Andreas

1 polubienie
4

Z ciekawości, jakie rozwiązanie wybraliście?
Makro
Makro + Integracja
Tylko integracja