Hi all
A little strangeness this morning when I wanted to integrate an excel table in my MEP.
My test consists of adding 3 lengths, (normally it's okay, it's not too complicated) except that the result is not good because it doesn't take into account the values after the decimal point. (see my example below)
HS mode: I take this opportunity to ask the modo, when will the color change of the "File transfer" button because light gray with white text is invisible limit.
Hi @fuz3d
See if it's not a comma/period problem
you must have a separator ditto Excel and Sw
@+ ;-)
PS and +1 for very light grey/white transfer
really not the foot ;-(
Indeed it is a comma/period problem.
By entering the values manually and not from a dimension, it goes to a point and it works.
Still to find how to pass SW in point^^
Thank you for your light for this problem that we have all had at one time or another with other software but that we don't necessarily think about^^
See this link to change the separator
@+
I finally took the time to resolve this issue.
Here's where to change the setting in SW.
