Hello
Do any of you know a link or a reference for the creation of a net in a tube that prevents the Hallo from light?
My example a thread with a pitch of 0.1 diameter 7 inside protruding stop. The closest thing would be a thin inch tap.
I couldn't find anything in my cartoonist's guide.
The tap clamped a sawtooth in the shape with a fine pitch with the flat part directed towards the light source.
http://fr.wikipedia.org/wiki/Filetage_en_dents_de_scie
r = 0
Hello
Visibly, it must be created from scratch under SW.
Attached, a scan of the GDI which gives all the dimensions, angles, etc...
http://imageshack.us/photo/my-images/515/image1qq0.jpg/
Good luck!
As a result, sawtooth threads are present in the Altitech library in the form of sketches to be inserted.
http://bib.altitech.free.fr/ver_2-2.html
See on this guide, page 16:
hi @ SEPM
you can if you want to use this piece and modify all the dimensions to get what you are looking for
http://www.lynkoa.com/sites/default/files/questions/answer/27/08/2013/filet_metrique.sldprt
@+ ;-)
@jose-acesa
Oooh that's all good!!!!
@gt22
Thank you... but I can't save the file....
you're on which version it's from 2012
@+
@Gt22 It's 2013
but it's exploring that throws me a bad link
