Hello everyone,
I would like to know how to put tolerance at the top of a rating. Thank you
Hello, if it's on solidworks, just click on the small logo that appears when inserting a rib.
A frame opens and that's where you can put your tolerance, your precision etc...
5 Likes
in addition to the answer @ Bart
http://help.solidworks.com/2012/French/SolidWorks/sldworks/HIDD_DRAW_DIMTOL.htm?id=43d269e714c9453a952386b51d2e1796
http://help.solidworks.com/2012/French/SolidWorks/sldworks/c_Dimension_Tolerance_and_Precision.htm?id=f314795f323e48f9a30927628f565ce0
3 Likes
or click on the dimension, and use the feature manager
2 Likes
During the creation of your plan, when you create a dimension, a window appears on the left with the title "Dimension" (see photo):
1) You go to the "Tolerance/Precision" box
2 ) You then choose between the different proposals (absolute, bilateral, limit...)
2bis) If you want to display an adjustment for the bore or shaft on a dimension (e.g. H7, H8, f7 etc...)
Hoping to have solved your problem. Good luck to you!!
cotation.jpg