Hello
In an assembly, I would like to replace the spline of the 3D sketch of the scan function with a curved function.
Is it directly feasible?
Fabian
1 Like
A screenshot would be welcome to understand the question
@+
3 Likes
I have a piece made in sweeping with a spline as an axis sketch.
I have to transmit the scan axis of my part (so the spline) in IGES. For me, the idea would be to convert this spline or piece into a curved function that can be saved in IGES.
fonction_balayage.png
1 Like
Attached is an example of a curve that could correspond to the needs.
(I don't know how this was achieved).
A+
fonction_courbe.png
1 Like
You can export your spline in DXF
When you save as DXF, in the options, you can choose to export the splines as splines or as polylines.
@+
1 Like
Hello
I want to have the spline in 3D, the dxf recording doesn't match, and the spline doesn't appear.
A+
1 Like
See these images
Import in IGS pay attention to the import options
SW file
2012 SW file attached
@+ ;-)
enregistrer_spline_en_3d_fabien_marceau.sldprt
2 Likes
Hello
Can't convert the curve from a 3D sketch?
1 Like
IGS export with the Select Sketches checkmark
SW 2012 attachment of the igs import
@+
enregistrer_spline_en_3d_fabien_marceau1_import_igs.sldprt
2 Likes
Hello,
I have solidworks in English.
Made of insert->curve->composite
and selects the spline of the 3D sketch
Ciao
1 Like
All good, thank you
Fabian
1 Like
you just had to choose the answer that allowed you to solve your problem
by checking the resolved box on it
This will allow you to find the right answer right away
and will allow the one who gave you the way or answer to earn some points that are convertible into gifts see Rewards tab
have a nice day @+ ;-)