Display an area in mm² in a MEP

3D Design
1

Hello

In a room, I have a sensor associated with a surface: measurement in mm²
How to display this sensor in the MEP of the room: in an annotation for example.

Or is there a PEM scoring tool that gives a surface and not a dimension
The difficulty is to define the surface area of the MEP.

So I have to bring the sensor from the room back to the MEP.

Does creating a surface in a room allow it to be dimensioned in the MEP?

 

2

Hello

At first glance, this is still not possible on the current versions.

To see:

https://www.lynkoa.com/forum/cao/propriete-de-superficie

https://www.lynkoa.com/forum/cao/afficher-une-note-dans-mise-en-plan-sw-pour-aire-de-la-surface-selectionnee

 

1 Like
3

Hello Olivier

Which sensor are you using!?

what version of SW do you have?

I guess you want something automatic otherwise there's a bit of a rough solution if you don't make 500 pieces a day ;-)

Kind regards

4

Hello 

 

I use SW 2017 and the "Measurement" sensor

5

Hello

 

There is this solution that could be suitable.

https://hawkridgesys.com/blog/creating-custom-property-selected-surface-area-solidworks

CDLT

 

3 Likes