Arête de forme non définie

alexis.kulling · Octobre 1, 2024, 10:47

Bonjour,
Je suis à la recherche du symbole pour les arêtes de forme non définie (le symbole ressemble à un angle droit avec des tolérances). Impossible de mettre la main dessus. Avez-vous une solution?

Merci d’avance

Maclane · Octobre 1, 2024, 12:03

Bonjour;
Le sujet a été abordé ici:

Solidworks ne semble pas le proposer d’origine, le plus simple serait de te créer un bloc.
Ou, si t’es Courageux, il est possible de créer des symboles personnalisés:
https://help.solidworks.com/2021/french/SolidWorks/sldworks/c_creating_custom_symbols_overview.htm

https://www.goengineer.com/blog/create-custom-symbols-solidworks

sbadenis · Octobre 1, 2024, 12:16

Il y en a vraiment qui utilise ce symboles?

Silver_Surfer · Octobre 2, 2024, 6:53

À ajouter au fichier de définition des symboles :

;; ---------------------------------------------------------------------------
;;									Arête de forme non déinie ISO 13715
;;
#AEDDND,Arête ext. - Dégagement requis - ISO 13715 - Dir. non définie
*0-0, Dégagement requis
A,LINE 0,-.3,.72,-.3
A,LINE .72,-.3,.72,-1.02
A,POLY .72,-.3,1.22,.05,1.07,.2
A,LINE .72,-.3,1.68,.66
A,LINE 1.68,.66,3.97,.66
A,LINE 1.92,1.98,1.92,.78
A,LINE 1.92,.78,3.1,.78
A,TEXT 2.6,1.36,-
*005, Dégagement 0,05 requis
A,LINE 0,-.3,.72,-.3
A,LINE .72,-.3,.72,-1.02
A,POLY .72,-.3,1.22,.05,1.07,.2
A,LINE .72,-.3,1.68,.66
A,LINE 1.68,.66,3.97,.66
A,LINE 1.92,1.98,1.92,.78
A,LINE 1.92,.78,3.1,.78
A,TEXT 3.,1.36,-0,05
*010, Dégagement 0,1 requis
A,LINE 0,-.3,.72,-.3
A,LINE .72,-.3,.72,-1.02
A,POLY .72,-.3,1.22,.05,1.07,.2
A,LINE .72,-.3,1.68,.66
A,LINE 1.68,.66,3.97,.66
A,LINE 1.92,1.98,1.92,.78
A,LINE 1.92,.78,3.1,.78
A,TEXT 2.8,1.36,-0,1
*020, Dégagement 0,2 requis
A,LINE 0,-.3,.72,-.3
A,LINE .72,-.3,.72,-1.02
A,POLY .72,-.3,1.22,.05,1.07,.2
A,LINE .72,-.3,1.68,.66
A,LINE 1.68,.66,3.97,.66
A,LINE 1.92,1.98,1.92,.78
A,LINE 1.92,.78,3.1,.78
A,TEXT 2.8,1.36,-0,2
*030, Dégagement 0,3 requis
A,LINE 0,-.3,.72,-.3
A,LINE .72,-.3,.72,-1.02
A,POLY .72,-.3,1.22,.05,1.07,.2
A,LINE .72,-.3,1.68,.66
A,LINE 1.68,.66,3.97,.66
A,LINE 1.92,1.98,1.92,.78
A,LINE 1.92,.78,3.1,.78
A,TEXT 2.8,1.36,-0,3
*040, Dégagement 0,4 requis
A,LINE 0,-.3,.72,-.3
A,LINE .72,-.3,.72,-1.02
A,POLY .72,-.3,1.22,.05,1.07,.2
A,LINE .72,-.3,1.68,.66
A,LINE 1.68,.66,3.97,.66
A,LINE 1.92,1.98,1.92,.78
A,LINE 1.92,.78,3.1,.78
A,TEXT 2.8,1.36,-0,4
*050, Dégagement 0,5 requis
A,LINE 0,-.3,.72,-.3
A,LINE .72,-.3,.72,-1.02
A,POLY .72,-.3,1.22,.05,1.07,.2
A,LINE .72,-.3,1.68,.66
A,LINE 1.68,.66,3.97,.66
A,LINE 1.92,1.98,1.92,.78
A,LINE 1.92,.78,3.1,.78
A,TEXT 2.8,1.36,-0,5
*100, Dégagement 1,0 requis
A,LINE 0,-.3,.72,-.3
A,LINE .72,-.3,.72,-1.02
A,POLY .72,-.3,1.22,.05,1.07,.2
A,LINE .72,-.3,1.68,.66
A,LINE 1.68,.66,3.97,.66
A,LINE 1.92,1.98,1.92,.78
A,LINE 1.92,.78,3.1,.78
A,TEXT 2.8,1.36,-1
*150, Dégagement 1,5 requis
A,LINE 0,-.3,.72,-.3
A,LINE .72,-.3,.72,-1.02
A,POLY .72,-.3,1.22,.05,1.07,.2
A,LINE .72,-.3,1.68,.66
A,LINE 1.68,.66,3.97,.66
A,LINE 1.92,1.98,1.92,.78
A,LINE 1.92,.78,3.1,.78
A,TEXT 2.8,1.36,-1,5
*200, Dégagement 2,0 requis
A,LINE 0,-.3,.72,-.3
A,LINE .72,-.3,.72,-1.02
A,POLY .72,-.3,1.22,.05,1.07,.2
A,LINE .72,-.3,1.68,.66
A,LINE 1.68,.66,3.97,.66
A,LINE 1.92,1.98,1.92,.78
A,LINE 1.92,.78,3.1,.78
A,TEXT 2.8,1.36,-2

#AIDDND,Arête int. - Dégagement requis - ISO 13715 - Dir. non définie
*0-0, Dégagement requis
A,LINE 0,-0.6,0.72,-0.6
A,LINE 0,0.12,0,-0.6
A,POLY 0,-0.6,0.5,-0.25,0.35,-0.1
A,LINE 0.3,-0.3,1.26,0.66
A,LINE 1.26,0.66,3.55,0.66
A,LINE 1.5,1.98,1.5,0.78
A,LINE 1.5,0.78,2.68,0.78
A,TEXT 2.2,1.36,-
*005, Dégagement 0,05 requis
A,LINE 0,-0.6,0.72,-0.6
A,LINE 0,0.12,0,-0.6
A,POLY 0,-0.6,0.5,-0.25,0.35,-0.1
A,LINE 0.3,-0.3,1.26,0.66
A,LINE 1.26,0.66,3.55,0.66
A,LINE 1.5,1.98,1.5,0.78
A,LINE 1.5,0.78,2.68,0.78
A,TEXT 2.58,1.36,-0,05
*010, Dégagement 0,1 requis
A,LINE 0,-0.6,0.72,-0.6
A,LINE 0,0.12,0,-0.6
A,POLY 0,-0.6,0.5,-0.25,0.35,-0.1
A,LINE 0.3,-0.3,1.26,0.66
A,LINE 1.26,0.66,3.55,0.66
A,LINE 1.5,1.98,1.5,0.78
A,LINE 1.5,0.78,2.68,0.78
A,TEXT 2.38,1.36,-0,1
*020, Dégagement 0,2 requis
A,LINE 0,-0.6,0.72,-0.6
A,LINE 0,0.12,0,-0.6
A,POLY 0,-0.6,0.5,-0.25,0.35,-0.1
A,LINE 0.3,-0.3,1.26,0.66
A,LINE 1.26,0.66,3.55,0.66
A,LINE 1.5,1.98,1.5,0.78
A,LINE 1.5,0.78,2.68,0.78
A,TEXT 2.38,1.36,-0,2
*030, Dégagement 0,3 requis
A,LINE 0,-0.6,0.72,-0.6
A,LINE 0,0.12,0,-0.6
A,POLY 0,-0.6,0.5,-0.25,0.35,-0.1
A,LINE 0.3,-0.3,1.26,0.66
A,LINE 1.26,0.66,3.55,0.66
A,LINE 1.5,1.98,1.5,0.78
A,LINE 1.5,0.78,2.68,0.78
A,TEXT 2.38,1.36,-0,3
*040, Dégagement 0,40 requis
A,LINE 0,-0.6,0.72,-0.6
A,LINE 0,0.12,0,-0.6
A,POLY 0,-0.6,0.5,-0.25,0.35,-0.1
A,LINE 0.3,-0.3,1.26,0.66
A,LINE 1.26,0.66,3.55,0.66
A,LINE 1.5,1.98,1.5,0.78
A,LINE 1.5,0.78,2.68,0.78
A,TEXT 2.38,1.36,-0,4
*050, Dégagement 0,5 requis
A,LINE 0,-0.6,0.72,-0.6
A,LINE 0,0.12,0,-0.6
A,POLY 0,-0.6,0.5,-0.25,0.35,-0.1
A,LINE 0.3,-0.3,1.26,0.66
A,LINE 1.26,0.66,3.55,0.66
A,LINE 1.5,1.98,1.5,0.78
A,LINE 1.5,0.78,2.68,0.78
A,TEXT 2.38,1.36,-0,5
*100, Dégagement 1,0 requis
A,LINE 0,-0.6,0.72,-0.6
A,LINE 0,0.12,0,-0.6
A,POLY 0,-0.6,0.5,-0.25,0.35,-0.1
A,LINE 0.3,-0.3,1.26,0.66
A,LINE 1.26,0.66,3.55,0.66
A,LINE 1.5,1.98,1.5,0.78
A,LINE 1.5,0.78,2.68,0.78
A,TEXT 2.38,1.36,-1
*150, Dégagement 1,5 requis
A,LINE 0,-0.6,0.72,-0.6
A,LINE 0,0.12,0,-0.6
A,POLY 0,-0.6,0.5,-0.25,0.35,-0.1
A,LINE 0.3,-0.3,1.26,0.66
A,LINE 1.26,0.66,3.55,0.66
A,LINE 1.5,1.98,1.5,0.78
A,LINE 1.5,0.78,2.68,0.78
A,TEXT 2.38,1.36,-1,5
*200, Dégagement 2,0 requis
A,LINE 0,-0.6,0.72,-0.6
A,LINE 0,0.12,0,-0.6
A,POLY 0,-0.6,0.5,-0.25,0.35,-0.1
A,LINE 0.3,-0.3,1.26,0.66
A,LINE 1.26,0.66,3.55,0.66
A,LINE 1.5,1.98,1.5,0.78
A,LINE 1.5,0.78,2.68,0.78
A,TEXT 2.38,1.36,-2

#AEBDND,Arête ext. - Bavure admise - ISO 13715 - Dir. non définie <centré>
*0-0, Bavure admise
A,LINE 0,-.3,.72,-.3
A,LINE .72,-.3,.72,-1.02
A,POLY .72,-.3,1.22,.05,1.07,.2
A,LINE .72,-.3,1.68,.66
A,LINE 1.68,.66,3.97,.66
A,LINE 1.92,1.98,1.92,.78
A,LINE 1.92,.78,3.1,.78
A,TEXT 2.6,1.36,+
*005, Bavure 0,05 admise
A,LINE 0,-.3,.72,-.3
A,LINE .72,-.3,.72,-1.02
A,POLY .72,-.3,1.22,.05,1.07,.2
A,LINE .72,-.3,1.68,.66
A,LINE 1.68,.66,3.97,.66
A,LINE 1.92,1.98,1.92,.78
A,LINE 1.92,.78,3.1,.78
A,TEXT 3.1,1.36,+0,05
*010, Bavure 0,1 admise
A,LINE 0,-.3,.72,-.3
A,LINE .72,-.3,.72,-1.02
A,POLY .72,-.3,1.22,.05,1.07,.2
A,LINE .72,-.3,1.68,.66
A,LINE 1.68,.66,3.97,.66
A,LINE 1.92,1.98,1.92,.78
A,LINE 1.92,.78,3.1,.78
A,TEXT 2.85,1.36,+0,1
*020, Bavure 0,2 admise
A,LINE 0,-.3,.72,-.3
A,LINE .72,-.3,.72,-1.02
A,POLY .72,-.3,1.22,.05,1.07,.2
A,LINE .72,-.3,1.68,.66
A,LINE 1.68,.66,3.97,.66
A,LINE 1.92,1.98,1.92,.78
A,LINE 1.92,.78,3.1,.78
A,TEXT 2.85,1.36,+0,2
*030, Bavure 0,3 admise
A,LINE 0,-.3,.72,-.3
A,LINE .72,-.3,.72,-1.02
A,POLY .72,-.3,1.22,.05,1.07,.2
A,LINE .72,-.3,1.68,.66
A,LINE 1.68,.66,3.97,.66
A,LINE 1.92,1.98,1.92,.78
A,LINE 1.92,.78,3.1,.78
A,TEXT 2.85,1.36,+0,3
*040, Bavure 0,4 admise
A,LINE 0,-.3,.72,-.3
A,LINE .72,-.3,.72,-1.02
A,POLY .72,-.3,1.22,.05,1.07,.2
A,LINE .72,-.3,1.68,.66
A,LINE 1.68,.66,3.97,.66
A,LINE 1.92,1.98,1.92,.78
A,LINE 1.92,.78,3.1,.78
A,TEXT 2.85,1.36,+0,4
*050, Bavure 0,5 admise
A,LINE 0,-.3,.72,-.3
A,LINE .72,-.3,.72,-1.02
A,POLY .72,-.3,1.22,.05,1.07,.2
A,LINE .72,-.3,1.68,.66
A,LINE 1.68,.66,3.97,.66
A,LINE 1.92,1.98,1.92,.78
A,LINE 1.92,.78,3.1,.78
A,TEXT 2.85,1.36,+0,5
*100, Bavure 1,0 admise
A,LINE 0,-.3,.72,-.3
A,LINE .72,-.3,.72,-1.02
A,POLY .72,-.3,1.22,.05,1.07,.2
A,LINE .72,-.3,1.68,.66
A,LINE 1.68,.66,3.97,.66
A,LINE 1.92,1.98,1.92,.78
A,LINE 1.92,.78,3.1,.78
A,TEXT 2.85,1.36,+1
*150, Bavure 1,5 admise
A,LINE 0,-.3,.72,-.3
A,LINE .72,-.3,.72,-1.02
A,POLY .72,-.3,1.22,.05,1.07,.2
A,LINE .72,-.3,1.68,.66
A,LINE 1.68,.66,3.97,.66
A,LINE 1.92,1.98,1.92,.78
A,LINE 1.92,.78,3.1,.78
A,TEXT 2.85,1.36,+1,5
*200, Bavure 2,0 admise
A,LINE 0,-.3,.72,-.3
A,LINE .72,-.3,.72,-1.02
A,POLY .72,-.3,1.22,.05,1.07,.2
A,LINE .72,-.3,1.68,.66
A,LINE 1.68,.66,3.97,.66
A,LINE 1.92,1.98,1.92,.78
A,LINE 1.92,.78,3.1,.78
A,TEXT 2.85,1.36,+2

#AIRDND,Arête int. - Raccordement admis - ISO 13715 - Dir. non définie <centré>
*0-0, Raccordement admis
A,LINE 0,-0.6,0.72,-0.6
A,LINE 0,0.12,0,-0.6
A,POLY 0,-0.6,0.5,-0.25,0.35,-0.1
A,LINE 0.3,-0.3,1.26,0.66
A,LINE 1.26,0.66,3.55,0.66
A,LINE 1.5,1.98,1.5,0.78
A,LINE 1.5,0.78,2.68,0.78
A,TEXT 2.2,1.36,+
*005, Raccordement 0,05 admis
A,LINE 0,-0.6,0.72,-0.6
A,LINE 0,0.12,0,-0.6
A,POLY 0,-0.6,0.5,-0.25,0.35,-0.1
A,LINE 0.3,-0.3,1.26,0.66
A,LINE 1.26,0.66,3.55,0.66
A,LINE 1.5,1.98,1.5,0.78
A,LINE 1.5,0.78,2.68,0.78
A,TEXT 2.7,1.36,+0,05
*010, Raccordement 0,1 admis
A,LINE 0,-0.6,0.72,-0.6
A,LINE 0,0.12,0,-0.6
A,POLY 0,-0.6,0.5,-0.25,0.35,-0.1
A,LINE 0.3,-0.3,1.26,0.66
A,LINE 1.26,0.66,3.55,0.66
A,LINE 1.5,1.98,1.5,0.78
A,LINE 1.5,0.78,2.68,0.78
A,TEXT 2.45,1.36,+0,1
*020, Raccordement 0,2 admis
A,LINE 0,-0.6,0.72,-0.6
A,LINE 0,0.12,0,-0.6
A,POLY 0,-0.6,0.5,-0.25,0.35,-0.1
A,LINE 0.3,-0.3,1.26,0.66
A,LINE 1.26,0.66,3.55,0.66
A,LINE 1.5,1.98,1.5,0.78
A,LINE 1.5,0.78,2.68,0.78
A,TEXT 2.45,1.36,+0,2
*030, Raccordement 0,3 admis
A,LINE 0,-0.6,0.72,-0.6
A,LINE 0,0.12,0,-0.6
A,POLY 0,-0.6,0.5,-0.25,0.35,-0.1
A,LINE 0.3,-0.3,1.26,0.66
A,LINE 1.26,0.66,3.55,0.66
A,LINE 1.5,1.98,1.5,0.78
A,LINE 1.5,0.78,2.68,0.78
A,TEXT 2.45,1.36,+0,3
*040, Raccordement 0,40 admis
A,LINE 0,-0.6,0.72,-0.6
A,LINE 0,0.12,0,-0.6
A,POLY 0,-0.6,0.5,-0.25,0.35,-0.1
A,LINE 0.3,-0.3,1.26,0.66
A,LINE 1.26,0.66,3.55,0.66
A,LINE 1.5,1.98,1.5,0.78
A,LINE 1.5,0.78,2.68,0.78
A,TEXT 2.45,1.36,+0,4
*050, Raccordement 0,5 admis
A,LINE 0,-0.6,0.72,-0.6
A,LINE 0,0.12,0,-0.6
A,POLY 0,-0.6,0.5,-0.25,0.35,-0.1
A,LINE 0.3,-0.3,1.26,0.66
A,LINE 1.26,0.66,3.55,0.66
A,LINE 1.5,1.98,1.5,0.78
A,LINE 1.5,0.78,2.68,0.78
A,TEXT 2.45,1.36,+0,5
*100, Raccordement 1,0 admis
A,LINE 0,-0.6,0.72,-0.6
A,LINE 0,0.12,0,-0.6
A,POLY 0,-0.6,0.5,-0.25,0.35,-0.1
A,LINE 0.3,-0.3,1.26,0.66
A,LINE 1.26,0.66,3.55,0.66
A,LINE 1.5,1.98,1.5,0.78
A,LINE 1.5,0.78,2.68,0.78
A,TEXT 2.38,1.36,+1
*150, Raccordement 1,5 admis
A,LINE 0,-0.6,0.72,-0.6
A,LINE 0,0.12,0,-0.6
A,POLY 0,-0.6,0.5,-0.25,0.35,-0.1
A,LINE 0.3,-0.3,1.26,0.66
A,LINE 1.26,0.66,3.55,0.66
A,LINE 1.5,1.98,1.5,0.78
A,LINE 1.5,0.78,2.68,0.78
A,TEXT 2.45,1.36,+1,5
*200, Raccordement 2,0 admis
A,LINE 0,-0.6,0.72,-0.6
A,LINE 0,0.12,0,-0.6
A,POLY 0,-0.6,0.5,-0.25,0.35,-0.1
A,LINE 0.3,-0.3,1.26,0.66
A,LINE 1.26,0.66,3.55,0.66
A,LINE 1.5,1.98,1.5,0.78
A,LINE 1.5,0.78,2.68,0.78
A,TEXT 2.38,1.36,+2

;;
;; ---------------------------------------------------------------------------
;;									Indications générales
;;
*AEAR, Spécification d'autre état d'arète requis
A,POLY 0,0,.5,.35,.35,.5
A,LINE 0,0,.96,.96
A,LINE .96,.96,2.38,.96
A,LINE 1.2,2.28,1.2,1.08
A,LINE 1.2,1.08,2.38,1.08
*AE2-5, Arête ext. - Dégagement requis - Taille: 0,2mm à 0,5mm
A,TEXT 0,1.66,ISO
A,TEXT 1.8,1.66,13715
A,LINE 1.5,0,2.22,0
A,LINE 2.22,0,2.22,-.72
A,POLY 2.22,0,2.72,.35,2.57,.5
A,LINE 2.22,0,3.18,.96
A,LINE 3.18,.96,5.47,.96
A,LINE 3.42,2.28,3.42,1.08
A,LINE 3.42,1.08,4.6,1.08
A,TEXT 4.3,2.66,-0,2
A,TEXT 4.3,1.66,-0,5
A,BOUND -1.2,6.5
*AI, Arête intérieure
A,LINE 0.,.1,0.,1
A,LINE 1,.1,0.,.1
A,BOUND -.2,.25
*AE01, Arête ext. - Dégagement requis - Taille: -0,1mm
A,TEXT 0,1.66,ISO
A,TEXT 1.8,1.66,13715
A,LINE 1.5,0,2.22,0
A,LINE 2.22,0,2.22,-.72
A,POLY 2.22,0,2.72,.35,2.57,.5
A,LINE 2.22,0,3.18,.96
A,LINE 3.18,.96,5.47,.96
A,LINE 3.42,2.28,3.42,1.08
A,LINE 3.42,1.08,4.6,1.08
A,TEXT 4.3,1.66,-0,1
A,BOUND -1.2,6.5

Maclane · Octobre 2, 2024, 7:21

Merci pour le partage @Silver_Surfer

Nota : le fichier à compléter avec ces nouveaux codes de symboles est :
=> Gtol.sym

L’original se trouve sous :
« C:\ProgramData\SOLIDWORKS\SOLIDWORKS 2022\lang\french\gtol.sym »

Mais, comme à mon habitude, je vous conseil de travailler sur une copie de ce fichier dans un emplacement réseau et rediriger les emplacement de fichier dans les options de Solidworks…)

Silver_Surfer · Octobre 3, 2024, 6:08

L’annotation en elle-même n’existe pas (encore).
Une demande d’amélioration existe :
Edge annotation (3ds.com)
Si comme moi - n’en déplaise à @sbadenis - vous utilisez ce symbole, je vous invite a voter pour cette amélioration…

sbadenis · Octobre 3, 2024, 6:26

Pas le besoin pour nous @Silver_Surfer (et tant mieux pour moi! ).
En revanche réponse plus que complète pour la demande initiale. Bravo!

alexis.kulling · Octobre 3, 2024, 7:08

Merci pour l’ensemble des réponses

Cyril.f · Octobre 3, 2024, 8:22

Bonjour,

Je viens de voter mais bon on voit la rapidité de SW à prendre en compte les demandes pour un symbole normé suivant l’ISO qui devrait de base être dans le logiciel.

Silver_Surfer · Octobre 3, 2024, 9:03

Comme tu dis… Mais c’est un bon argument à opposer à l’annonce des augmentations de prix lors du renouvellement de licences !

sbadenis · Octobre 3, 2024, 9:42

Entre perdre tout ton historique pour passer sur un autre logiciel 3D et quelques oublis bug ou autres problème récurent ou pas, ils savent très bien que pour nous le choix est vite fait. En gros on nous tient par les c…
Et c’est pas près de changer…

Le_Bidule · Octobre 3, 2024, 11:17

Vivement l’intégration de l’IA
Plus de bugs, plus d’aberration, …