Cases a cocher dans nomenclature piping

Out of category
1

Hello

When I draw a piping line, I integrate a bill of materials.

I would like to be able to integrate into the nomenclature model a checkbox, visible and interactive, to display a cross in front of the desired line.


case_a_cocher.jpg
2

I don't think it's possible in a nomenclature of a MEP. What is the goal? Check what you ordered?

3

The goal is to indicate to the pipefitters when there is an accessory to be cut...

4

No interactivity but a column where you could insert an X by double clicking in the box wouldn't be enough?

1 Like
5

Yes, this solution may be enough, thank you.

6

In addition, by playing with the configurations and custom properties, it could appear directly.
During the design, you just have to choose if the accessory is modified or not, and you can have 2 marks in the nomenclature if the accessory is used in several places modified or not.

7

Hello

I'm very interested in the option to check a box with an X through the double click. Any information on how to set this up?

8

Just add a column in the nomenclature then double-click on the box you are interested in and type X.