Choice of graphics card and driver according to SW site

Out of category
1

Hello

I ended up finding a card that would certainly suit me for my pc case, this one,

http://www.priceminister.com/mfp/5137529/nvidia-quadro-k600?pid=205210369&filter=20

It may not be worth a quadro 2000 that I was advised but I can't find one in low profile.

I also looked at the SW drivers site the one that would be suitable but I see several, how to choose?

diiity


pilotes_de_carte_graphique_i_solidworks.pdf
2

It's clear that the choice is vast!

We need a specialist

3

For the driver, you choose according to your OS and your highest version of SOLIDWORKS on your computer, you'll see that in the end, you don't have that much choice anymore:)

If you still have a choice, you take the most recent example:

4

The CG drivers correspond to the SW version you have as well as the version of Windaube

So which SW version do you have or are you going to install I repeat a minimum SP3 version

according to your SW version year the windaube which corresponds to the mieu

for SW 2013 it's windaube 7 pro preferably the family is not optimized for

so for me 2 drivers

331.82 / 341.92

I'll do a test with the first one

@+ ;-)

 

5

First of all, thank you all,

Who can do more, can do less!!

So, I can use the 2016 version but in sp3 mini rather than the 2013, it suits me, I will be able to easily recover my parts created with the 2016 sp0.

diiity

6

That's it, I took the plunge, I bought the card.

All you have to do is choose the driver... I'm waiting for the GT22 test

And maybe switch to win pro!!

diiity

7

no it's you who will test the best driver for your card

I can't do it since it's not the type of card I have ;-)

@+

8

By default, take the most recent (highest number).

If there is a problem, we go down a generation and so on.
If you get to that point, there's a big problem.

9

Well, I'm waiting for the map and I'll keep you posted.

diiity

10

I allow myself to put forward a point on the drivers following experience.

When you have only one version of solidworks (example 2016) you have to take the most recent one.

On the other hand, when you have 2015 and 2016 to install often, the penultimate is common to both versions. => so the wise choice is to install the driver compatible with both versions.

 

11

Hello

Logically, the most recent version should be suitable for older versions or not?

diiity

12

not on @+

13

the most recent driver for 2016 for example is not suitable for 2014, 

There is a display but I noticed pixelation as if my quadro 2000 worked like a 600 for assembly.