How do I display the callback lines of a tube in interrupted view?

2D plans Layout
1

I'm working on SW2016 and I'd like to dimension the outer ø of a tube that is in interrupted view.

Strangely, when I select the outer lines of the tube, it tells me that it's an ø but when I put the dimension between the break lines, the return lines disappear.

Here's an image

2

apart from shifting your rating............  (which is right in the center of your break) 

I can't see

1 Like
3

Pull the odds to the right or left and from a moment on, the lines will appear.

Then you can put them back in the right place.

1 Like
4

So I tried to move to one side, to the other, but it doesn't show up.

Is there an option to be settled?

5

Be careful, sometimes you have to slide the dimension away from the room for the lines to reappear.

6

Hello

Have you tried to remove the break and redo the rib then take it out of the room and redo the break and replace the rib as you want...

2 Likes
7

I tried according to the information of AC Cobra, but nothing helps.

I don't know if it's a bug or something but it doesn't work on my workstation or that of my 3 colleagues.

Thank you all for your comments.

8

same for me impossible to have the return lines between the break

I'm in SW 2012

@+ ;-)

1 Like
9

esais dimensioning view of the model object in annotation

and select the odds

@+ ;-)

2 Likes
10

For me it's the abnormal behavior of solidworks, it interompes the recall lines as soon as the dimension is on the part and doesn't take into account the interrupt so no reminder line on an interrupted view (sw2014).

So I leave my rib on the room and not in the interrupted part of the view even if it's less clean...

2 Likes
11

Sorry I don't agree with the best answer @sbadenis

and it's not for the points ;-)

it is indeed possible...................; -)

See my answer 

esais dimensioning view of the model object in annotation

and select the odds

I seem to have the recall line in the desired place

for this you have to take the dimensions of the 3D if of course it has been rated

@+ ;-)

2 Likes
12

Agree with the gt22 solution, I tested it and it works... On the other hand, where it's not cool; It's on the -1 doesn't come back Sbadenis because he only has to say what's true. By doing a normal quotation, this is the good behavior of Solidwoks. The -1 should be assigned to the person who selected the best answer, well that's my point of view...

1 Like
13

well OK AcCobra....................................... I'll correct it right away ;-)

and believe me I have nothing against @ our friend far from it 

What kills me is that the answer is given, it blows your eyes and no one sees anything ;-)

it's the Breizh language that wants that ;-)

@+ ;-)

1 Like