How to rate this coin?

Out of category
1

Hello everyone I would like to dimension a sheet metal part with folds at an open angle in a drawing, the problem is the border of the plies which is taken for  the tie line, I would like to dimension the point intersection formed by the 2 open plies; On the outside side of course, I don't know if I'm clear enough, I'll put a screenshot for understanding.

Thank you for your answers

Marco

 

 

 


capture_decran_18_li.jpg
2

Hello

you have to make points at the intersection

Kind regards

3 Likes
3

Or you start your hill on the 1st point then right click intersection and you choose the 2 stops of the intersection. (this avoids creating a point beforehand, but comes back to the same thing in the end)

3 Likes
4

Hello Sbadenis,

I didn't understand your method.

1 selection of the first OK point

2 right clicks I come across 

I'm interested.

Kind regards

1 Like
5

I forgot a step, right-click on one of the 2 strokes of the intersection.

Here is the example:

https://i.imgur.com/Q9Ytayw.gifv

1 Like
6

Thank you, Sbadenis
Fortunately you put the video.

1 Like