Hi all
I would like my drawings to be independent of my digital model.
Thank you for your help.
Hello
Can you give us more details about your problem and your need...
impossible
since the plans depend on the 3D parts
so if you modify the 3D parts
your drawing will be modified
the only way is to change the name of the 3D part
and you will have as many plans as 3D parts
@+ ;-)
Possible: You can "save as" your drawing in detached drawing ;-)
3 Likes
@ max in this case she is dead and + ref via the 3D
@+
No, you can redo the update with the 3d in a right click if needed
Hi all
I would like the changes I make on my digital model not to appear on my drawings? That's the question I asked yesterday.
I managed to do this using the tool (component configuration).
Now the problem is that in my drawing, I would like to hide my edges. When I right-click, then hide the stop it doesn't want to hide anymore.
Knowing, I've already done this on one of my drawings just before and on the same piece, and even stop.
I'm attaching a picture, (I'd like to hide all the lines in blue)
I didn't know if I was clear enough in my explanations, but I thank you in advance if you have a solution for this little problem.
Thank you all.
reservoir.png
Hello
If you right-click on it and you have it hidden.
In fact, it's a body that you're trying to hide?
You talk about configuration, you can choose the configuration to display in a view (except section view, detail view).
Hello
Have you tried the "right-click/convert view to sketch" to freeze your views? There is no going back, however...
It is possible to record its drawing by breaking the link with the room. Our plan works independently of its original 3d part. Afterwards, it is also possible to link your 3d part to your plan without a link to have an update/update of the views.
Use view configurations to freeze your project images with a layout associated with a plan view.