Hello
I would like to draw a braided garland on Solidworks, with the leds, following a defined outline.
How can I do this?
What would you advise me?
Thank you.
Hello
I would like to draw a braided garland on Solidworks, with the leds, following a defined outline.
How can I do this?
What would you advise me?
Thank you.
Good evening
If it's to make a representation, by a 3D sketch in spline and an extruded base it has to do it.
The hardest part is to draw the braid.
To inspire: https://grabcad.com/library/magnawreath-snowflake-wreath
Hi @benj5112
Watch this tutorial
http://www.lynkoa.com/tutos/3d/modelisation-corde-fil
@+ ;-)
Hello
If you really want a braid, I think SEPM. Gerald gave you the solution, otherwise, maybe with the propeller and spiral function, you could get something pretty good too.
Cdt
Eric
In the same style see these tutorials to make cable, rope, wire animation
http://www.lynkoa.com/tutos/3d/animation-corde-cable-sous-solidworks
http://www.lynkoa.com/tutos/3d/comment-faire-un-cable-se-deplacent-dans-solidworks
@+ ;-)
Ok, that's what I wanted. I'm going to try that tomorrow with more light and bulbs!
In fact it is this method, but there is a limit in the number of rounds to be braided.
Hi @benj5112
Can you explain to me why we are limited to the number of turns ?????????????????
Don't forget that you have three bodies that must not touch each other if braid of 3 elements
The only limit is your PC (graphics card) and the length of your wire
1000 meters in one piece, yes it's starting to be long ;D ;D ;D
@+ ;-)
as all this intrigued me, I tried "in real" with my 5m RGB led strip to see the rendering between braid and side by side.... Not convinced
What do you mean Gerald? Is there a library under solidworks of braids or LED cables
Well in fact Gt22, you can only go up to 100 turns max for the rotation around the outline. (In the swipe option). And in the end the longer you have a cable, the less twisted it is. Maybe there is another option?
Hi benj5112
if you are limited in the number of turns (100t) via this app
Why not use the Body Repeat feature
since the location of your lights along this braid must be at one time or another in the same place
@+ ;-)