Hello
I'm starting to discover the configuration by part family and I was wondering if it was possible to change its text (done with the Text sketch tool) in the part family table .
Example:
I have a piece that says "HT / 1000". I then create a configuration because you need a second part that is slightly different in terms of dimensions and especially with the text "HT / 500" in exactly the same place as "HT / 1000". Is it possible to change it via the room family table?
While waiting for an interesting answer,
Hello
Upgrade to see if it's a little bit like that? If that's it, I'll explain to you how we do it. Part made under 2016
tu_o_-_3_avec_degaufrage_et_configuration_.sldprt
4 Likes
Yes, that's it. So how come?
Hello
You need to link your text to the "configuration name" property
After that, for the position, it depends on your sketch.
edits: larger image link;
text_pilote_par_config.jpg
2 Likes
Dsl for delay; here's how to do it in the ZIP file with the part
configurer_une_esquisse_texte_par_famille_de_pieces.zip
2 Likes
Thank you for your help and answers!
It's true that it's easier with the configuration name binding, I proceed differently because my marking is not always identical to the name of my configuration.
3 Likes