Different dimensions between room and plan

Out of category
1

Hello

I used solidworks in high school class and have been back to it for 2 days.

I still have good leftovers but I have a problem when I create the layout of my piece.

Is it a 45mm by 15mm plate? I did a material removal on 0.5 mm and when I want to dimension the drawing, the dimension of the removal has gone from 0.5 mm to 0.35 mm. I don't remember if it's normal. I managed to change it but on all sides there is only the extrusion that changes.

I enclose the piece as well as the plan.

Thank you

 

Thibaud


barette_.rar
2

You must have placed your coastline incorrectly.

 

At home I have 0.5mm

 

See image.


0.png
2 Likes
3

Haha, it smells like the sideways between the chamfer and the bottom (no I'm not kidding, I've never done that! *whistles*)

2 Likes
4

Thank you for your answers.

Bart: How did you get this view? when I quote on the trimetric view I always have 0.35..

coin37coin: I don't think I selected the Chanfrin because I took the dimension from one end of the extrusion to the other (in depth)


barette_.slddrw
5

What I don't understand is that when I dimension a piece on the drawing I have 0.5 mm and once I dimension on the pan I have 0.35..


barette_2.png
6

Ahhh

 

In this case, click on the trim view and check the True box in "type of dimensions"

 

View image


vraies.png
2 Likes
7

Thank you Bart, I succeeded for the view as well as for the rating,

Many thanks; Good luck

1 Like