Hello
Would someone be kind enough to create a file for me that I could send to a sheet metal shop to make a fold. I am not familiar with CAD programs.
I made a 2D ' drawing ' on Illustrator that I attach to this message.
Thank you in advance for your help.
Stephan
Rampe.pdf (530.2 KB)
Hello
the thickness of the sheet metal and the material are missing.
I guess it's a ramp for PRM access, provide a non-slip or checkered aluminum sheet.
That said, if you send your plan with the indications that are missing from a sheet metal company. They will be able to make you an all-inclusive offer.
1 Like
Hello
It's not a ramp for people with reduced mobility, it's a ramp that I have to put in a storage space to compensate for the difference in level.
Indeed, with the thickness, it would be much better 
It will be made in a 50/10 steel sheet (non-tearplated).
Thanks in advance
Rampe.pdf (530.3 KB)
I have the sheet metal and what to cut it. It's a local company that will do the folding for me
Here are the plans and 3D files
With 5mm sheet metal it will not be possible to make a fold 10 or 15mm from the edge. The bender will probably use 24 or 32mm vees so I lengthened the floor part to 20mm
Folding tôle.pdf (17.7 KB)
Sheet metal bending. SLDPRT (184.1 KB)
Sheet metal bending. WWTP (40.2 KB)
1 Like
Thank you for your plan. The folder will indeed have to make a longer fold but he will then cut again.
That's why I put the best answer to Bob_2000