Automatic part-in-panel cutting

3D Design
1

Hello
I would like to know if it is possible to easily cut a volume body into several sections, so that they can be machined later.

Here is one of the pieces in question:

3 inte. SLDPRT (59.7 KB)

The panels I use for my machine are 2800x2070 mm.

The idea would be to easily cut the piece to recover the bodies as follows:

image
image837×803 40.4 KB

This would allow me to easily nesting each element.

There are about 15 rooms of different sizes, to be divided into 4 to 8 sections.
That is to say from 60 to 120 different bodies to be recovered.

Thank you in advance for your help

2

If no play is tolerated, you can make configurations with a different extrusion in each

1 Like
3

Thank you for the answer.

Would it be possible for you to send me a document file to see how you proceed?

4

If the parts are already modeled (and for example integrated into MEPs) it could be more interesting to use fractionation and then removal of the body or the rough method with material removals. The problem with splitting is that you'll have to create more shots.
(Everything is done via configurations as proposed by III, let's say it's variants)

3 Likes
5

You can use the split function (Insert Menu, Function, Split), then select one or more planes (separation plane) and a body. This will create the different pieces for you.

image
image1609×868 81.3 KB

Or another more manual solution is to remove material of a very minimal width to separate the body into several bodies in the same room.

4 Likes
6

Ah, Sbadenis who gives more complete answers than mine^^

2 Likes
7

Yes, but with a delay @iPoilz :crazy_face:

1 Like
8

The split solution worked wonderfully :slight_smile:
Thank you