Sheet metal cutting

Out of category
1

Hello,

I want to make a cut of my sheet metal, I created a sketch but it doesn't work.

I want to separate a frame into 4 parts.

Is this a problem since after that it will not be 1 single piece of sheet metal but 4?

 

 

 

 

 

 


decoupe_tolerie.png
2

Hello

It seems to me that we should use the "split rooms" function.

1 Like
3

Hello

I don't really understand when you say "it won't be 1 single piece of sheet metal but 4"

OR it means that you see something that looks like profiles with corner cutouts a bit like in the image I'm attaching. In which case, yes, it is possible, but for it to be beautiful , the profiles would have to be straight and make the corner cut with a corner saw.

Otherwise you won't have the joined edges and it will be ugly

Kind regards


2019-11-13_14_35_18-window.jpg
1 Like
4

The cut shown is the one I am trying to do, it is laser/bending that I will do this will be welded entirely in the corners afterwards.

1 Like
5

Hello

I don't understand why, it doesn't work for having done it. In general , when you extrude at the four corners after drawing the sketch, the software asks if you want to keep "all the bodies or not".

1 Like
6

Agree with ZOZO

7

I opened a ticket and got confirmation that it was indeed splitting in my case that should be used.

Except that when I tried to split my piece I only made one line on my piece when I should have done 2.

Thank you

 

Terry

1 Like
8

Hi @terry

Thank you for your feedback :-)