Empty description in the BOM

2D plans Layout
1

Hello

I have a problem with a nomenclature. When I create it, it shows me the description of the sets but not of my parts.

Does anyone have an idea to make them appear?

Attached is the drawing.


sans_titre.png
2

Hello

Do you have multiple configurations of the parts inserted into the assembly? Maybe you filled out the wrong configuration. And are you up to date with the latest version of Solidwoks?

1 Like
3

Hello

The answer is certainly in @OBI WAN's answer to this post:

http://www.lynkoa.com/forum/2d/solidworks-probleme-entre-configuration-et-nomenclature

You need to select the right property in the table. Or as @manu67 says, the wrong property has been filled.

4

I have always made my names this way. Each part number has a description, which is displayed when I create my BOM.

Here I have an assembly of parts (P50....)  and assembly (SE50....) as well as welded construction

I'm on solidworks 2013

Azrod, I tried adding a column with another property as shown on the link, nothing changes.


sans_titre1.png
5

I think it's a problem with your PEs because in the 1st screen print it's only the PEs where nothing is displayed and the SEs there is the description in the nomenclature... You should look for this side....

6

Hello, it may seem silly but have you tried to re-insert a table??  Maybe you have made a bad mistake and re-inserting it will reactivate an option disabled by mistake???

 

Kind regards

7

Hello

Your "description" property must be entered correctly in the part properties.

To do this, you open your part in solid and you go to "file", "properties" and there you can check if the "description" field is filled.

Have a nice day

2 Likes
8

See this tutorial

https://www.youtube.com/watch?v=rU6uZNHXG98

Your problem must be a non-recognition of the property description of the part

here example sheet metal and mechanically welded

a utility exists 

Embed A demo here

9

Thank you g.leluyer , I have indeed filled in the properties and the descriptions are displayed.

Surprising that it doesn't tell me about them here while on other nomenclatures if ...